OM-1743-005w.pdf - 第142页
1209-001 1 1.2 T ape Feeder not correctly locked Remedy : Remove any chip component or foreign substance such as debris attached on the feeder base and completely clean the feeder base. If the tape feeder is used while i…
Remedy
: Remove any chip component or foreign substance such as debris attached on the
suppressor and completely clean the suppressor.
If the taping component is mounted with any foreign substance attached, the suppresser
might be deformed or a pick-up error occur.
Therefore, clean it.
Cause : Chip component has become attached inside the suppressor and
moves wild.
Chip component or foreign
substances including debris
Notice
1209-001
Remedy
: Clean the vacuum nozzle on the main machine of SIGMA-F8 according to "Volume
4: Maintenance and Troubleshooting" in the Instruction Manual for SIGMA-F8 main
machine.
If the factory is dusty or if paper taping component is often used, then the vacuum nozzle and vacuum
nozzle lter can easily become dirty.
Keep them clean.
Cause : Dirty Vacuum Nozzle
Clogged Vacuum Nozzle Hole
Dirty Vacuum Nozzle Filter
Note
Remedy
: Remove any chip component or alien substance such as debris on the sprocket to clean
it completely.
Cause : A chip component or alien substance is attached on the sprocket.
11.1 Component Pick-up Error
OM-1743
11-2
1209-001
11.2 Tape Feeder not correctly locked
Remedy
: Remove any chip component or foreign substance such as debris attached on the
feeder base and completely clean the feeder base.
If the tape feeder is used while it has not been locked, it might cause damage to the machine or pick-
up error.
Attach the tape feeder securely to the feeder base.
Cause : Chip component or foreign substances including debris have been
attached onto the feeder base.
Note
11.2 Tape Feeder not correctly locked
OM-1743
11-3
1209-001
11.3 Tape Feed not correctly performed
Remedy
: Remove any chip component or foreign substance such as debris attached onto the
suppressor and completely clean the suppressor.
Notice
If the taping component is mounted with any foreign substance attached, the suppressor
might be deformed or a pick-up error occur.
Therefore, clean it.
Cause : Chip component or foreign substances including debris have been
attached inside the suppressor and the suppressor does not securely
hold the tape.
Remedy
: Engage the carrier tape sprocket hole with the sprocket teeth.
Cause : Carrier Tape Sprocket Hole not engaged with the sprocket teeth.
Remedy
: Lock the suppressor with the front hook.
Cause : Front hook has not locked properly and the suppressor does not hold
the tape securely.
Chip component or foreign
substances including debris
11.3 Tape Feed not correctly performed
OM-1743
11-4