OM-1743-005w.pdf - 第103页

7.4.4 Component Discharging Section Discharging Outlet Every week Cleaning Blow the air in the direction of the discharging outlet. (The components are discharged from the opening opposite to this outlet). When any compo…

7.4.3 Cover Tape Take-up Section

Tape Guide Roller

Every week Cleaning

Clean it with a rag soaked in alcohol.

Fig. G7

1209-001

7.4 Maintenance Spots

OM-1743

7-8

7.4.4 Component Discharging Section

Discharging Outlet

Every week Cleaning

Blow the air in the direction of

the discharging outlet.

(The components are discharged

from the opening opposite to this

outlet).

When any component is

removed using air-blow,

the components might

scatter around, so perform

this operation paying

attention to the surrounding

condition.

Note

Fig. G8

1209-001

7.4 Maintenance Spots

OM-1743

7-9

7.4.5 Joint Detection Unit

In the case of GD-38080 or GD-38083

Sensor Section

Tape Guide on the Joint Detection Unit

(Only for GD-38080 and GD-38083)

Every week Cleaning

• For GD-38080 or GD-38083, lift the cover and

remove any alien substance using the applicator

or bamboo probe.

If any foreign substance is attached

when the tape is passed through,

it might damage the joint detection

sensor or cause a tape feeding error.

Refer to "7.5.4 8 mm Dual Feeder

Joint Detection Unit Sensor Section

Cleaning (For GD-38080, or GD-38083)

for details.

Reference

Notice

Fig. G9

1209-001

7.4 Maintenance Spots

OM-1743

7-10