OM-1743-005w.pdf - 第30页

1209-001 OM-1743 1-6

1209-001

[12] Cover Tape Outlet Cover

This is the cover on the cover tape housing section.

This cover is opened when the cover tape is taken out from the cover tape

housing section.

[13] Cutter

This cutter cuts off the cover tape taken from the cover tape housing section.

[14] Magnetic Plate

It is attached to the chute section.

Using magnetic force, the component pick-up operation is stabilized.

[15] Magnetic Plate Housing Section

When the Magnetic Plate is not to be used, it is stored in this housing space.

1.2 Name and Function of Each Section

OM-1743

1-5

1209-001

OM-1743

1-6

2. Attachment and Detachment of Tape

2.1 Attachment of Paper or Embossed Tape

Procedure

(1) While gently pressing the end of the suppressor with your nger, press the

lower side of the front hook to lift the suppressor.

Suppressor

Front Hook

Fig. B1

Notice

The suppressor is an important component which affects the pick-

up rate greatly.

If unnecessary stress works on the suppressor, such as dropping

the tape feeder, it might become deformed.

Take the greatest care in handling the suppressor.

Suppressor

• 8 mm Width Dual Feeder

When the suppressor is lifted to

the point where clicking sound

is heard, the upper section can

be locked.

Fig. B2

1209-001

2. Attachment and Detachment of Tape

OM-1743

2-1