OM-1743-005w.pdf - 第110页

1209-001 7.5.1.5 PCB BOX Cover Removal Procedure Procedure (1) Remove two set screws for the PCB BOX Cover . PCB BOX Cover Cover Set Screws Fig. G20 (2) Hold the upper side of the PBC BOX Cover and slide it in the arrow …

1209-001

7.5.1.4 Left Side Cover #2 Attachment Procedure

Procedure

(1) Hold the upper side of the Left Side Cover #2 and slide it in the arrow

direction to attach.

Insert the claw section on the Left Side Cover #2 into the slit with the

sequence of 1, 2, 3, 4 and 5 shown in the gure below and slide the cover

while pressing it from above.

Sliding Direction

Step 1

Step 2

Step 4

Step 5

Step 3

Fig. G18

Note

When the cover is attached, take care not to catch any cable.

(2) Fasten the cover set screws and x the Left Side Cover #2.

Cover Set Screws

Fig. G19

7.5 Maintenance Method

OM-1743

7-15

1209-001

7.5.1.5 PCB BOX Cover Removal Procedure

Procedure

(1) Remove two set screws for the PCB BOX Cover.

PCB BOX Cover

Cover Set Screws

Fig. G20

(2) Hold the upper side of the PBC BOX Cover and slide it in the arrow

direction to remove.

Sliding Direction

Fig. G21

7.5 Maintenance Method

OM-1743

7-16

1209-001

7.5.1.6 PCB BOX Cover Attachment Procedure

Procedure

(1) Hold the right side of the PCB BOX Cover and slide it in the arrow direction

to insert two claws. (Step 1)

Sliding Direction

Step 1

Fig. G22

(2) Hold the upper side of the PCB BOX Cover and slide it in the arrow

direction to attach.

Insert the claw section on the PCB BOX Cover into the slit with the sequence

of 2 and 3 shown in the gure below and slide the cover while pressing it

from above.

Sliding Direction

Step 3

Step 2

Fig. G23

Note

When the cover is attached, take care not to catch any cable.

7.5 Maintenance Method

OM-1743

7-17