西门子SIPLACE S-27 HM用户手册.pdf - 第149页
User Manual SIPLAC E S-27 HM 6 Component han dling Software vers ion SR.503.xx 07/2003 US Edition 6.4 Component trolley 149 6.4.4 Support for the middle t ape reel for 3 x 8 mm feeders T ype 3 x 8 mm S feeder s transp or…
6 Component handling User Manual SIPLACE S-27 HM
6.4 Component trolley Software version SR.503.xx07/2003 US Edition
148
6
Fig. 6.4 - 4 Connecting the compressed air supply for bulk case feeders
(1) Coupling plug for compressed air
(2) Coupling socket with supply hose
(3) Compressed air distributor for bulk case feeders
User Manual SIPLACE S-27 HM 6 Component handling
Software version SR.503.xx 07/2003 US Edition 6.4 Component trolley
149
6.4.4 Support for the middle tape reel for 3 x 8 mm feeders
Type 3 x 8 mm S feeders transport components to the pick-up position on three tracks. The tape
reels for the two outer tracks are located between the dividing plates in the tape container. The
middle tape reel is arranged over the tape reels for the two outer tracks.
For the middle tape reels you will therefore also need:
– 1 adapter plate for holding the tape reel holder (item 1) and
– 1 tape reel holder (item 2) for every two feeders
The adapter plate is fixed to the component trolley with four fillister head screws, and the tape
reel holders are inserted into the square openings in the adapter plate.
Fig. 6.4 - 5 Support for the middle tape reel for 3 x 8 mm feeders
(1) Adapter plate
(2) Tape reel holder
6 Component handling User Manual SIPLACE S-27 HM
6.5 Used tape cutter Software version SR.503.xx07/2003 US Edition
150
6.5 Used tape cutter
6.5.1 General
The placement system has a used tape cutter at each of the two component trolley locations. It is
used to cut off the waste tape. The cut pieces of tape drop into the waste tape container in the
component trolley.
Æ Empty the waste tape container every day.
Fig. 6.5 - 1 Used tape cutter
(1) Stationary cutting blade
(2) Retainer
(3) Moving cutting blade
(4) Electronic control unit
(5) Short stroke cylinder