西门子SIPLACE S-27 HM用户手册.pdf - 第20页
1 Introduction User Manual S IPLACE S-27 H M 1.5 EU-Declara tion of Conformity Software version SR.503.xx07/2003 US Edition 20 1.5 E U-Declaration of Conformity The pro duct/devic e descr ibed belo w 1 product: Automa ti…
User Manual SIPLACE S-27 HM 1 Introduction
Software version SR.503.xx 07/2003 US Edition 1.3 Danger notes
19
Service engineers 1
This class is intended for engineers from SIEMENSDEMATIC AG. They are trained to carry out
servicing work and to upgrade and retrofit the placement system. 1
1.3 Danger notes
WARNING 1
– A thorough knowledge of the relevant part of this User Manual is required before carrying out
any work on the machine.
– All work must be carried out by appropriately trained and qualified personnel.
– All warning, caution and danger notes MUST be observed.
– In addition, read through chapter 2 of the user manual carefully.
1.4 Liability of the manufacturer/supplier
We draw your attention to the fact that this user manual only contains descriptive and explanatory
material and does not include any contractual conditions or undertakings. All obligations of Sie-
mens Dematic AG proceed from the conclusion of the contract concerned, under which you have
the machine described herein. This applies in particular to all statements regarding performance
or service life and the agreed liability for faults or defects. The provisions of the contract regarding
the liability for faults or defect are neither extended nor restricted by any statements in this user
manual.. 1
1 Introduction User Manual SIPLACE S-27 HM
1.5 EU-Declaration of Conformity Software version SR.503.xx07/2003 US Edition
20
1.5 EU-Declaration of Conformity
The product/device described below 1
product: Automatic Placement System
type: SIPLACE S-27 HM
item no.: 118500 1
manufactured by 1
SIEMENSDEMATIC AG
Electronics Assembly Systems
Rupert-Mayer-Str. 44
D-81359 Munich 1
conforms to the relevant provisions of: 1
– Directive 98/37/EC of the European Parliament and of the Council of June 22, 1998 on the
approximation of the laws of the Member States relating to machinery
– Council Directive 89/336/EEC of May 3, 1989 on the approximation of the laws of the Mem-
ber States relating to electromagnetic compatibility
The product(s) identified above comply with the requirements of the above EU directive by meet-
ing the following standards: 1
EN 292-1, EN 292-2, EN 294, EN 349, EN 418, EN 811, EN 60204-1, EN 60825-1
BGV A1
1
, BGV A2
1)
, VBG 5
1)
, EN 61000-3-2/3, EN 61000-4-2/3/4/5/6/8 1
1.6 Revision index
1
1
1
1. National specifications
This declaration certifies the compliance with the indicated directives but implies no warranty of properties.
The safety instructions of the accompanying product documentation shall be observed.
Manual Software version Edition
First version Preliminary operating instructions SR.503.xx 11/2001 DE
First edition User Manual SR.503.xx 03/2003 US
Revision User Manual SR.503.xx 07/2003 US
User Manual SIPLACE S-27 HM 1 Introduction
Software version SR.503.xx 07/2003 US Edition 1.7 Abbreviations
21
1.7 Abbreviations
1
1
1
C&P 1 Collect&Place 1
C&P12 1 Collect&Place head with 12 segments 1
C&P6 1 Collect&Place head with 6 segments 1
CO 1 Component 1
DCA 1 Direct Chip Attach 1
FC 1 Flip chip 1
GND 1 Ground 1
IC 1 Integrated circuit 1
MTC 1 Matrix tray changer 1
P&P 1 Pick&Place 1
PCB 1 Printed circuit board 1
WPTC 1 Waffle-pack tray carrier 1
WT 1 Waffle-pack tray 1