西门子SIPLACE S-27 HM用户手册.pdf - 第47页
User Manual SIPLAC E S-27 HM 2 Operational safety Software vers ion SR.503.xx 07/ 2003 US Edition 2.4 Safe ty instructions for operating the machine 47 2.4.7 Safety in structions for the t ape cutter 2 Fig. 2.4 - 4 S afe…
2 Operational safety User Manual SIPLACE S-27 HM
2.4 Safety instructions for operating the machine Software version SR.503.xx07/2003 US Edition
46
The feeders are labeled as shown below:
2
WARNING FIRE HAZARD 2
Æ Check and empty the waste tape container every hour.
Æ Only empty the waste tape container into suitable collection containers because of the risk of
fire. These containers must not be set up inside buildings.
Approved for
capacitors based on
metal-powder
Freigegeben für
Kondensatoren auf
Metallpulver-Basis
User Manual SIPLACE S-27 HM 2 Operational safety
Software version SR.503.xx 07/2003 US Edition 2.4 Safety instructions for operating the machine
47
2.4.7 Safety instructions for the tape cutter
2
Fig. 2.4 - 4 Safety instructions for the tape cutter
WARNING RISK OF CUTTING! 2
Æ Never reach down into the used tape channel (Pos. 1) from above with bare hands, even if the
machine is switched off.
Æ Similarly, even when the machine is switched off, do not reach up from below with bare hands
into the ejection opening of the tape cutter (Pos. 2), e.g. to remove waste used tape.
Æ To remove waste used tape, it is essential to switch the machine off first and put on very sub-
stantial protective gloves, as the tape cutter bars are extremely sharp.
2 Operational safety User Manual SIPLACE S-27 HM
2.4 Safety instructions for operating the machine Software version SR.503.xx07/2003 US Edition
48
2.4.8 Safety instructions for docking and undocking the matrix tray changer
2
Fig. 2.4 - 5 Safety instructions for coupling and uncoupling the matrix tray changer
2
(1) Gap when the matrix tray changer is coupled
(2) Matrix tray changer control cable
(3) Control cable for component feeder table
(4) Power supply connection