西门子SIPLACE S-27 HM用户手册.pdf - 第28页
2 Operational safety User Manual SIPLACE S-27 HM 2.2 Warning labels Software version SR. 503.xx07/2003 US Edition 28 2.2 W arning labels 2.2.1 W arning labels W20 1, W203 , W204, and W2 06 on the machine The warnin g lab…
User Manual SIPLACE S-27 HM 2 Operational safety
Software version SR.503.xx 07/2003 US Edition 2.1 Safety instructions
27
2.1.6 Safety instructions for laser units
Permission to operate components that are classified as lasers is withdrawn if
– mechanical damage to the unit is observed, or
– any work is done on the mechanical or electrical parts of the unit.
Even damaged or missing screw locking paint on laser components (e.g. cover plates, fas-
teners, adjusting potentiometer) counts as work.
– Only SIEMENSDEMATIC AG service engineers, or the machine owner's service engineers
who have been trained by SIEMENSDEMATIC are allowed to replace laser components.
– Repairs to laser units are carried out at the SIEMENSDEMATIC factory exclusively.
2.1.7 Important notes on environmentally-friendly disposal of materials
and components
SIPLACE systems are manufactured using only materials and parts that can be easily separated
and disposed of in an environmentally-friendly way. Hazardous materials are not necessary for the
installation, dismantling or operation of the system.
NOTE 2
The owner of the system has sole responsibility for the proper environmentally-friendly disposal
of machines, working materials, consumables and wear parts.
Æ Please observe your national statutory provisions for waste disposal and environmental pro-
tection.
2 Operational safety User Manual SIPLACE S-27 HM
2.2 Warning labels Software version SR.503.xx07/2003 US Edition
28
2.2 Warning labels
2.2.1 Warning labels W201, W203, W204, and W206 on the machine
The warning labels are made from soft PVC film, and are abrasion-proof, light-fast and resistant
to water and weathering.
Their design meets the requirements of ISO 3864-2 and ANSI Z535.4.
Fig. 2.2 - 1 Warning labels on the machine - part 1
Item W203, part no. 03009341-01
Item W204, part no. 03009343-01
Item W206, part no. 03009345-01
User Manual SIPLACE S-27 HM 2 Operational safety
Software version SR.503.xx 07/2003 US Edition 2.2 Warning labels
29
WARNING 2
– Do not use abrasive cleaners or solvents for cleaning warning labels..
– Replace any damaged or illegible warning or notice labels.
Fig. 2.2 - 2 Warning labels on the machine - part 2
Item W201, part no. 03009338-01
Item W203, part no. 03009342-01
Item W206, part no. 03009345-01