西门子SIPLACE S-27 HM用户手册.pdf - 第160页
6 Component handling User Manual SIPLACE S-27 HM 6.6 Matrix tray changer Software version SR.503.xx07/2003 US Edition 160
User Manual SIPLACE S-27 HM 6 Component handling
Software version SR.503.xx 07/2003 US Edition 6.6 Matrix tray changer
159
WARNING 6
Æ NEVER place your hand in the gaps between the matrix tray changer and machine frame
(item 1) while the machine is running.
Æ Always couple the matrix tray changer to the machine before connecting or disconnecting the
matrix tray changer control cable at the machine socket (item 2).
Æ Always couple the matrix tray changer to the machine before connecting or disconnecting the
control cable for the matrix tray changer’s integral component feeder table at the machine
socket (item 3).
Æ Always couple the matrix tray changer to the machine before connecting or disconnecting the
power cable from the external power supply (item 4).
Æ NEVER operate the matrix tray changer if it is not docked to the machine.
6 Component handling User Manual SIPLACE S-27 HM
6.6 Matrix tray changer Software version SR.503.xx07/2003 US Edition
160
User Manual SIPLACE S-27 HM 7 Station extensions
Software version SR.503.xx 07/2003 US Edition 7.1 Nozzle changer for the 12-segment Collect&Place head
161
7 Station extensions
7.1 Nozzle changer for the 12-segment Collect&Place
head
7.1.1 Overview
The placement system is supplied as standard with two Collect&Place heads. As an option, a
nozzle changer can be installed for each Collect&Place head. This enables the nozzle configura-
tion to be changed quickly, thus allowing the Collect&Place head to be quickly adapted to the
needs of the placement process.
The nozzle changer consists of at least one, and up to eight magazines, each with twelve nozzle
garages (see Fig. 7.1 - 1
). The magazines are seated on a common support. Each magazine is
centered using two parallel pins and fixed in place with a spring hook.
PLEASE NOTE: 7
Please refer to Section 7.7
on page 189 for information on the nozzle changer for the 6-segment
Collect&Place head. 7
7.1.2 Technical data
7
Nozzle changer for the 12-segment Collect&Place head
Dimensions (length x width x height) 282 mm x 214 mm x 107 mm
Number of nozzle garages Min. 12 / max. 96
Nozzle types 9 xx
Time required to open and close the locking plate < 200 ms
Capacity of the reject bin Approx. 50 nozzles
Pneumatic system Compressed air line 0.53 MPa (5.3 bar)