AltaPail II Bulk Melters Product Manual.pdf - 第15页
Safety 1-4 E 11/2014 Nordson Corporation Safe_PPA1011LUE_EN Instructions and Safety Messages S Read and foll ow the instructions provided in t his document and other referenced documents. S Familiarize yourself with the …
Safety
1-3
E 11/2014 Nordson Corporation
Safe_PPA1011LUE_EN
User Qualifications
Equipment owners are responsible for ensuring that users:
S
receive safety training appropriate to their job function as directed by
governing regulations and best industry practices
S
are familiar with the equipment owner's safety and accident
prevention policies and procedures
S
receive equipment- and task-specific training from another qualified
individual
NOTE: Nordson can provide equipment-specific installation,
operation, and maintenance training. Contact your Nordson
representative for information
S
possess industry- and trade-specific skills and a level of experience
appropriate to their job function
S
are physically capable of performing their job function and are not
under the influence of any substance that degrades their mental
capacity or physical capabilities
Applicable Industry Safety Practices
The following safety practices apply to the use of the equipment in the
manner described in this document. The information provided here is not
meant to include all possible safety practices, but represents the best safety
practices for equipment of similar hazard potential used in similar industries.
Intended Use of the Equipment
S
Use the equipment only for the purposes described and within the limits
specified in this document.
S
Do not modify the equipment.
S
Do not use incompatible materials or unapproved auxiliary devices.
Contact your Nordson representative if you have any questions on
material compatibility or the use of non-standard auxiliary devices.
Safety
1-4
E 11/2014 Nordson Corporation
Safe_PPA1011LUE_EN
Instructions and Safety Messages
S
Read and follow the instructions provided in this document and other
referenced documents.
S
Familiarize yourself with the location and meaning of the safety warning
labels and tags affixed to the equipment. Refer to Safety Labels and Tags
at the end of this section.
S
If you are unsure of how to use the equipment, contact your Nordson
representative for assistance.
Installation Practices
S
Install the equipment in accordance with the instructions provided in this
document and in the documentation provided with auxiliary devices.
S
Ensure that the equipment is rated for the environment in which it will be
used. This equipment has not been certified for compliance with the
ATEX directive nor as nonincendive and should not be installed in
potentially explosive environments.
S
Ensure that the processing characteristics of the material will not create a
hazardous environment. Refer to the Material Safety Data Sheet (MSDS)
for the material.
S
If the required installation configuration does not match the installation
instructions, contact your Nordson representative for assistance.
S
Position the equipment for safe operation. Observe the requirements for
clearance between the equipment and other objects.
S
Install lockable power disconnects to isolate the equipment and all
independently powered auxiliary devices from their power sources.
S
Properly ground all equipment. Contact your local building code
enforcement agency for specific requirements.
S
Ensure that fuses of the correct type and rating are installed in fused
equipment.
S
Contact the authority having jurisdiction to determine the requirement for
installation permits or inspections.
Operating Practices
S
Familiarize yourself with the location and operation of all safety devices
and indicators.
S
Confirm that the equipment, including all safety devices (guards,
interlocks, etc.), is in good working order and that the required
environmental conditions exist.
S
Use the personal protective equipment (PPE) specified for each task.
Refer to Equipment Safety Information or the material manufacturer's
instructions and MSDS for PPE requirements.
S
Do not use equipment that is malfunctioning or shows signs of a potential
malfunction.
Maintenance and Repair Practices
Safety
1-5
E 11/2014 Nordson Corporation
Safe_PPA1011LUE_EN
S
Allow only personnel with appropriate training and experience to operate
or service the equipment.
S
Perform scheduled maintenance activities at the intervals described in
this document.
S
Relieve system hydraulic and pneumatic pressure before servicing the
equipment.
S
De-energize the equipment and all auxiliary devices before servicing the
equipment.
S
Use only new Nordson-authorized refurbished or replacement parts.
S
Read and comply with the manufacturer's instructions and the MSDS
supplied with equipment cleaning compounds.
NOTE: MSDSs for cleaning compounds that are sold by Nordson are
available at www.nordson.com or by calling your Nordson representative.
S
Confirm the correct operation of all safety devices before placing the
equipment back into operation.
S
Dispose of waste cleaning compounds and residual process materials
according to governing regulations. Refer to the applicable MSDS or
contact the authority having jurisdiction for information.
S
Keep equipment safety warning labels clean. Replace worn or damaged
labels.
Equipment Safety Information
This equipment safety information is applicable to the following types of
Nordson equipment:
S
hot melt and cold adhesive application equipment and all related
accessories
S
pattern controllers, timers, detection and verification systems, and all
other optional process control devices