AltaPail II Bulk Melters Product Manual.pdf - 第228页
Technical Dat a 12-6 Part 1121836_03 E 11/2014 Nordson Corporation This page intentiona lly left blank.
Technical Data
12-5
Part 1121836_03
E 11/2014 Nordson Corporation
Dimensions and Weights
Weight
Transformer and hood kit: 50 Kg (110 Lbs)
Transformer and hood kit and melter: 385 Kg (847 Lbs)
Dimensions
in
mm
Figure 12-1 Dimensions in brackets: Space required for installation
Technical Data
12-6
Part 1121836_03
E 11/2014 Nordson Corporation
This page intentionally left blank.
General Instructions Regarding Working with Application Materials
A-1
Part 1121836_03
E 11/2014 Nordson Corporation
Appendix A
General Instructions Regarding Working
with Application Materials
Definition of Terms
Application materials can be e.g. thermoplastic hot melt materials,
adhesives, sealants, liquid adhesives and similar application materials. They
are referred to as materials.
NOTE: The materials that may be processed with your Nordson product are
described in the manual under Intended Use and Unintended Use. When in
doubt, please contact your Nordson representative.
Manufacturer Information
Materials may be processed only when the manufacturer's product
descriptions and Safety Data Sheets (MSDS) are observed.
They provide information, amongst other things, on correct processing of the
product, transport, storage and disposal. Information regarding reactivity and
potentially hazardous decomposition products, toxic properties, flash points,
etc. can also be found there.
Liability
Nordson is not be liable for danger or damage resulting from the materials.
Risk of Burns
There is a risk of burns when handling heated materials. Work carefully and
wear appropriate protective clothing/equipment.