AltaPail II Bulk Melters Product Manual.pdf - 第74页
Basic Software Me lter Configuration 6 -5 Part 1121836_03 E 1 1/2014 Nordson Corporation Enabling/Dis abling Internal and Exte rnal Zones The following a re default setting s for internal an d external zone s. Zone Defau…
Basic Software Melter Configuration
6-4
Part 1121836_03
E 11/2014 Nordson Corporation
Configuring Internal and External Zones
There are two types of zones.
Type Default Name Notes
Internal Zone Platen
S
There is only one internal zone - the Platen.
S
You can enable/disable the platen, as well as modify its set point
temperature.
External
Zones
Zone (# + letter)
for example
Zone 1A
S
External zones include hoses, automatic or hand applicators and
optional air heaters.
S
Default name consists of the word Zone, and its corresponding
channel number. Typically, these are pairs, where the letter A
represents a hose and the letter B represents the applicator. You
can change these default PID type associations.
S
You can enable/disable the zone, change its PID (channel) type
association, modify its set-point temperature and its name.
S
At least one external zone is required for normal operation.
Basic Software Melter Configuration
6-5
Part 1121836_03
E 11/2014 Nordson Corporation
Enabling/Disabling Internal and External Zones
The following are default settings for internal and external zones.
Zone Default
Internal Enabled
External Enabled
Master
Controls
System Status:
Platen
176_C
176_C
Pump
GTL
32 RPM
Zone 1A
Ready/OK
Pump: On
Heaters:On
Password: Disabled
Recipes:
Nothing Loaded
176_C
Zone 1B
176_C
Zone 2A
176_C
Zone 2B
External
Zones
Internal
Zone
Zone 1A
Done
Zone State: Enabled
Adjust Set Point
Zone 1A
Change PID Type
Create/Modify Name
Hose
176_C
1. Access the Home screen and touch a platen or any other zone that you
want to enable or disable.
2. Touch the colored button to enable or disable the zone. Touch Done.
Button Color Description
Green On
White Off
3. Touch Done.
NOTES:
S
Enabling or disabling a zone takes effect when you touch Done.
Basic Software Melter Configuration
6-6
Part 1121836_03
E 11/2014 Nordson Corporation
S
The (internal zone) Platen and at least one external zone must be
enabled for normal melter operation.