AltaPail II Bulk Melters Product Manual.pdf - 第21页

Safety 1-10 E 11/2014 Nordson Corporation Safe_PPA1011LUE_EN Other Safety Precautions S Do not use an open flame to hea t hot melt s ystem components. S Check high pressure hoses daily for signs of ex cessive wear, d ama…

100%1 / 230
Safety
1-9
E 11/2014 Nordson Corporation
Safe_PPA1011LUE_EN
Table 1-1 General Safety Warnings and Cautions (contd)
Equipment
Type
Warning or Caution
HM, CA, PC
WARNING! Allow only personnel with appropriate training and
experience to operate or service the equipment. The use of untrained
or inexperienced personnel to operate or service the equipment can
result in injury, including death, to themselves and others and can
damage to the equipment.
HM
CAUTION! Hot surfaces! Avoid contact with the hot metal surfaces of
applicators, hoses, and certain components of the melter. If contact
can not be avoided, wear heat-protective gloves and clothing when
working around heated equipment. Failure to avoid contact with hot
metal surfaces can result in personal injury.
HM
CAUTION! Some Nordson melters are specifically designed to
process polyurethane reactive (PUR) hot melt. Attempting to process
PUR in equipment not specifically designed for this purpose can
damage the equipment and cause premature reaction of the hot melt. If
you are unsure of the equipment's ability to process PUR, contact your
Nordson representative for assistance.
HM, CA
CAUTION! Before using any cleaning or flushing compound on or in
the equipment, read and comply with the manufacturer's instructions
and the MSDS supplied with the compound. Some cleaning
compounds can react unpredictably with hot melt or cold adhesive,
resulting in damage to the equipment.
HM
CAUTION! Nordson hot melt equipment is factory tested with Nordson
Type R fluid that contains polyester adipate plasticizer. Certain hot melt
materials can react with Type R fluid and form a solid gum that can
clog the equipment. Before using the equipment, confirm that the hot
melt is compatible with Type R fluid.
Safety
1-10
E 11/2014 Nordson Corporation
Safe_PPA1011LUE_EN
Other Safety Precautions
S
Do not use an open flame to heat hot melt system components.
S
Check high pressure hoses daily for signs of excessive wear, damage, or
leaks.
S
Never point a dispensing handgun at yourself or others.
S
Suspend dispensing handguns by their proper suspension point.
First Aid
If molten hot melt comes in contact with your skin:
1. Do NOT attempt to remove the molten hot melt from your skin.
2. Immediately soak the affected area in clean, cold water until the hot melt
has cooled.
3. Do NOT attempt to remove the solidified hot melt from your skin.
4. In case of severe burns, treat for shock.
5. Seek expert medical attention immediately. Give the MSDS for the hot
melt to the medical personnel providing treatment.
Safety
1-11
E 11/2014 Nordson Corporation
Safe_PPA1011LUE_EN
Safety Labels and Tags
Figure 1-1 illustrates the location of the safety labels and warning tags affixed
to the equipment. Table -2 provides an illustration of the hazard identification
symbols that appear on the safety labels and tags, the meaning of the
symbols and the exact wording of the safety message.
1
2
3
4
5
2
Figure 1-1 Safety Labels and Tags