00197042-04_SM_X-Serie-S_Customer_EN.pdf - 第115页
4 Electrics and control system 4.5 Indicator lamp Service Manual SIPLACE X-Serie S 06/2019 115 4.5 Indicator lamp There are multiple version of the indicator lamps: Fig.138: Version 1 (outdated) Fig.139: Version 2 See …
4 Electrics and control system
4.4 Replacing the cover switch
114 Service Manual SIPLACE X-Serie S 06/2019
4.4 Replacing the cover switch
Parts, equipment and tools
●
Safety switch AZ 16-03zvrk-M16 3Oe [03055263-xx]
Overview
Fig.137: Cover switch
1. Cover switch
2. Connector
Removal
► Switch off the machine, disconnect it from the power supply and secure it to prevent
unauthorized reactivation.
1.2 "Preparatory work..." [}16]
► Unplug the connection cable from the cover switch.
► Remove the screws fastening the cover switch and remove the cover switch.
Installation
► Follow the removal instructions in reverse order for installation. Also observe the following
instructions:
– The cover switch must be set to the cover. Make sure that the cover switch is clean and
switches properly. The cover switch needs to be set so that even a minimal opening of the
cover will trigger the safety circuit.
Also read section 2.4 "Setting the Covers" [}31].
– Switch the machine on and make sure that the cover switch activates the safety circuit,
when the protective covers are opened.
4 Electrics and control system
4.5 Indicator lamp
Service Manual SIPLACE X-Serie S 06/2019 115
4.5 Indicator lamp
There are multiple version of the indicator lamps:
Fig.138: Version 1 (outdated)
Fig.139: Version 2
See 4.5.1 "Indicator lamps (version1)" [}116] See 4.5.2 "Indicator lamp (version2)" [}118]
4 Electrics and control system
4.5 Indicator lamp
116 Service Manual SIPLACE X-Serie S 06/2019
4.5.1 Indicator lamps (version1)
4.5.1.1 Replacing the Indicator Lamp
Parts, equipment and tools
●
Tower light standard [03103121-xx]
NOTICE
Two- and three-part fault indicator lamp
The main fault indicator lamp consists of a green basic module and can be configured as a
two-part version or a three-part version:
► Light tower, two colors [00519895Sxx] (with an additional white continuous light ele-
ment)
► Light tower, three colors [00519896Sxx] (with an additional red and yellow continuous
light element)
Overview
Fig.140: Indicator lamp (version1))
Two color indicator lamp (white/green)
Removal
► Switch off the machine, disconnect it from the power supply and secure it to prevent
unauthorized reactivation.
1.2 "Preparatory work..." [}16]
► Unplug the electrical connections to the indicator lamp. You might like to mark their positions
to make clear assignment easier later on.
► Remove the screw fastening the indicator lamp.
Installation
► Installation is performed by following the above instructions in the reverse order.
When inserting the illuminant, observe the identification on the casing.
► Check the function of the indicator lamp.