00197042-04_SM_X-Serie-S_Customer_EN.pdf - 第420页
9 Component feeding 9.6 Smart Pin Support 420 Service Manual SIPLACE X-Serie S 06/2019 9.6.18.1 Magazine recognition board Fig.577: Magazine recognition board [03093494-xx] The magazine recognition board is part of the …
9 Component feeding
9.6 Smart Pin Support
Service Manual SIPLACE X-Serie S 06/2019 419
9.6.18 Replacing the Magazine Recognition Board
NOTICE
Technical Information "SPS: Malfunction of magazine identification boards"
► If the magazine identification board fails, observe the Technical Information "SPS:
Malfunction of magazine identification boards" [DE: TI2014-07D06] [EN:
TI2014-07E06].
NOTICE
From SW 706.1 SP2
From SW 706.1 SP2, magazines can be fitted without the "magazine recognition" function.
In this case, the machine can only be configured manually via the software (Autoconfig).
► Read the assembly instructions "SIPLACE X Series S - Option Smart Pin Sup-
port" [00197394‑xx] (German/English).
Parts, equipment and tools
●
Magazine recognition SPS assembly [03093494-xx]
●
Assembly instructions "Smart Pin Support" for SIPLACE X‑SeriesS [DEEN:00197394‑xx]
Overview
Fig.576: Magazine recognition board (using example ofQ10
here)
1. Magazine recognition board
2. Power supply cable
3. Flat ribbon cable
4. Jumper
5. Metal bracket
Removal and installation
► Refer to the appropriate assembly instructions for details of removal and installation.
9 Component feeding
9.6 Smart Pin Support
420 Service Manual SIPLACE X-Serie S 06/2019
9.6.18.1 Magazine recognition board
Fig.577: Magazine recognition board [03093494-xx]
The magazine recognition board is part of the
pin magazines for the "Smart Pin Support" op-
tion.
This board may be missing, depending on the
magazine version used.
LEDs:
H3: not used
H4: FPGA OK
H6: Power supply 3.3 V OK
DIP switch S1 - jumper assignment
S1.1 S1.2 Magazine connected at:
ON OFF NC connection 2
OFF ON NC connection 4
S1.4 S1.5 S1.6 Meaning
OFF OFF OFF Garage is switched off
ON OFF OFF Garage type W5
OFF ON OFF Garage type Q10
ON ON OFF Garage type L10
X X ON Reserved
NOTICE
Jumper S1.3 is not used.
10 Vacuum Pump
10.1 Replacing the vacuum pump
Service Manual SIPLACE X-Serie S 06/2019 421
10 Vacuum Pump
DANGER
Observe User Manual
► Please observe the safety instructions in the user manual for all work!
10.1 Replacing the vacuum pump
Parts, equipment and tools
●
Vacuum pump Becker VX4 25 [03069679-xx]
You will also need the relevant assembly instruction manual for your machine:
●
Assembly instructions "Option Vacuum Pump SIPLACE X-Series S up to Gxxxx, SX4/
DX4" [DE+EN:00196845‑xx]
●
Assembly instructions "Option Vacuum Pump SIPLACE X-Series S from Hxxxx " [DEEN:
00198599‑xx]
Removal/installation
► Refer to the appropriate assembly instructions.
10.2 Replacing the exhaust air hose
Parts, equipment and tools
●
Exhaust air hose ID100 [03087599-xx]
Overview
Fig.578: Exhaust air hose
1. Exhaust air hose
2. Hose clamp
3. Hose holder
The exhaust tube is fixed to the underside of
the machine.
Removal
► Switch off the machine, disconnect it from the power supply and secure it to prevent
unauthorized reactivation.
1.2 "Preparatory work..." [}16]
► Loosen the two screws fastening the hose holder. The hose holder has two keyholes. The
fastening screws do not need to be completely loosened.
► Turn the hose holder a little and remove it.
► Open the hose clamp and remove the hose.
Installation
► Follow the removal instructions in reverse order for installation.