00197042-04_SM_X-Serie-S_Customer_EN.pdf - 第380页
9 Component feeding 9.4 Docking Station for Component Trolley 380 Service Manual SIPLACE X-Serie S 06/2019 Fig.510: Docking station – back 1 Control valve [03003489-xx] 9.4.11 "Replacing the control valve" [ }…
9 Component feeding
9.4 Docking Station for Component Trolley
Service Manual SIPLACE X-Serie S 06/2019 379
9.4 Docking Station for Component Trolley
DANGER
Observe User Manual
► Please observe the safety instructions in the user manual for all work!
9.4.1 Docking station for component trolley - overview
Fig.509: Docking station – front
1 Docking station – assembly [00116933-xx]
2 Unlocking pushbutton [00334095-xx]
9.4.10 "Replacing the unlocking pushbutton" [}392]
3 Power pack and pressure control valve for locking cylinder (behind the cover)
9.4.2 "Replacing the power pack" [}381]
4 Locking lever [03025104-xx]
9.4.5 "Replacing the locking lever" [}384]
5 Feeder unlock device 40-fold [03011582-XX]
9.4.7 "Replacing the 40-fold feeder unlocking device" [}387]
6 Feeder Control Unit (FCU)
9.4.8 "Replacing the Feeder Control Unit (FCU)" [}388]
7 Short-stroke cylinder for locking unit [03034831‑xx]
9.4.4 "Replacing the locking unit short-stroke cylinder" [}383]
9 Component feeding
9.4 Docking Station for Component Trolley
380 Service Manual SIPLACE X-Serie S 06/2019
Fig.510: Docking station – back
1 Control valve [03003489-xx]
9.4.11 "Replacing the control valve" [}394]
2 ON/OFF switch
3 Microfuse [03033387-xx]
9.4.3 "Replacing the micro switch" [}382]
4 Pressure control valve for bulkcase feeder and main connection (5.5 bar)
9.4.6 "Replacing the positions end switch of the component trolley locking device" [}386]
9.4.9 "Replacing the Complete Coupling - Earthing and Compressed Air for the Bulk
Case" [}391]
9 Component feeding
9.4 Docking Station for Component Trolley
Service Manual SIPLACE X-Serie S 06/2019 381
9.4.2 Replacing the power pack
NOTICE
Observing the technical information
► Observe the technical information "Power pack for docking station for component trol-
ley SIPLACE X [116933] and SX [116965] has been discontinued" [DE: TI2015-04D07]
[EN: TI2015-04E07].
Parts
03121806‑xx Switching power supply RSP-500-27 (replaces: [03025938‑xx])
Equipment and tools
00353832-xx Allen key set
Wire cutters
Cable ties
Voltage measuring device
00198460‑xx Detailed circuit diagrams folder SIPLACE TX V2-Series
Removal / installation
DANGER
Switch off the voltage supply
► Press the ON/OFF button to switch off and disconnect the power supply.
4
3
1
3
2
Fig.511: Removing the cover
The power pack(4) is located behind the
cover(1).
► Remove the four screws(3) fastening
the cover. The cover is clamped in
place with the help of the bar(2).
► Pull the cover out of the docking sta-
tion.
Pay attention to the ground connection.
4
3
1
2
Fig.512: Removing the power pack
► Disconnect all electrical connections(4)
to the power pack(3). You may want to
mark their positions to make clear as-
signment easier later on.
► Remove the four screws(2) fastening
the power pack and then remove the
power pack.
► Connect all cables and fit the new
power pack.
► Press the ON/OFF button(1) to switch
on.