00197042-04_SM_X-Serie-S_Customer_EN.pdf - 第287页

7 Conveyor 7.8 Laser light barriers, fiber optic cable and PCB sensors Service Manual SIPLACE X-Serie S 06/2019 287 Fig.362: Setting the fiber optic sensor - 4

7 Conveyor

7.8 Laser light barriers, fiber optic cable and PCB sensors

286 Service Manual SIPLACE X-Serie S 06/2019

Fig.361: Setting the fiber optic sensor - 3

7 Conveyor

7.8 Laser light barriers, fiber optic cable and PCB sensors

Service Manual SIPLACE X-Serie S 06/2019 287

Fig.362: Setting the fiber optic sensor - 4

7 Conveyor

7.8 Laser light barriers, fiber optic cable and PCB sensors

288 Service Manual SIPLACE X-Serie S 06/2019

7.8.9 Teaching the PCB sensors (SW70x)

Whenever you manually loosen the conveyor rails, you also need to reteach the light barrier

sensors. This is required because the light intensity depends on the conveyor width. Without teach-

ing, the conveyor will show boards which are not present, preventing the conveyor from being ref-

erenced.

Teaching is performed automatically during operation.

Procedure

Fig.363: Select operator level

► Select the

button, to open the

Configure, update and calibrate the

machine menu.

► Select the

button to open the

Check and set user settings menu.

► Switch over to the operator level Ma-

chine service.

ð The

button will be shown.

Fig.364: Checking sensors and functions

► Click the

button.

► Click the

button.

► Click on the Conveyor inputs/outputs

button.