00197042-04_SM_X-Serie-S_Customer_EN.pdf - 第261页

7 Conveyor 7.7 Clamping Plate, Clamping Rails and Belt Guidance Service Manual SIPLACE X-Serie S 06/2019 261 Side panel Input area PA1 Center PA1 DC SC SIPLACE X4i S A Fixed, right [03093767-xx] Belt guidance A/C PA2 IC …

100%1 / 428
7 Conveyor
7.7 Clamping Plate, Clamping Rails and Belt Guidance
260 Service Manual SIPLACE X-Serie S 06/2019
Side panel Input area PA1 Center PA1
DC SC
SIPLACE X4i S
A Fixed,
right
[03093894-xx] Belt
guidance A/C PA1
IC SX4a
[03094127-xx] Clamping rail A/C PA1 380
450 assembly SX4a
[03093880-xx] Belt
guidance A/C PA1
OC SX4a
Thick board: [03100557-xx] clamping rail
TBO A/C PA1 380 450 assembly SX4a
B [03094528-xx] Belt
guidance B/D PA1
IC SX4a
[03094541-xx] Clamping rail B/D PA1 380
assembly SX4a
[03094526-xx] Belt
guidance B/D PA1
OC SX4a
Thick board: [03100571-xx] Clamping rail
TBO B/D PA1 380 assembly SX4a
C Fixed,
left
[03093894-xx] Belt
guidance A/C PA1
IC SX4a
[03094127-xx] Clamping rail A/C PA1 380
450 assembly SX4a
[03093880-xx] Belt
guidance A/C PA1
OC SX4a
Thick board: [03100557-xx] clamping rail
TBO A/C PA1 380 450 assembly SX4a
D [03094528-xx] Belt
guidance B/D PA1
IC SX4a
[03094541-xx] Clamping rail B/D PA1 380
assembly SX4a
[03094526-xx] Belt
guidance B/D PA1
OC SX4a
Thick board: [03100571-xx] Clamping rail
TBO B/D PA1 380 assembly SX4a
Side panel Center PA2 PA2 Output area
DC SC
SIPLACE X4 S, X3 S
A Fixed,
right
[03093767-xx] Belt
guidance A/C PA2
IC SX4a
[03094115-xx] Clamping rail A/C PA2 380
450 assembly SX4a
[03093766-xx] Belt
guidance A/C PA2
OC SX4a
Thick board: [03100554-xx] clamping rail
TBO A/C PA2 380 450 assembly SX4a
B [03094434-xx] Belt
guidance B/D PA2
IC SX4a
[03094452-xx] Clamping rail B/D PA2 450
assembly SX4a
[03094433-xx] Belt
guidance B/D PA2
OC SX4a
Thick board: [03100563-xx] Clamping rail
TBO B/D PA2 450 assembly SX4a
C Fixed,
left
[03093767-xx] Belt
guidance A/C PA2
IC SX4a
[03094115-xx] Clamping rail A/C PA2 380
450 assembly SX4a
[03093766-xx] Belt
guidance A/C PA2
OC SX4a
Thick board: [03100554-xx] clamping rail
TBO A/C PA2 380 450 assembly SX4a
D [03094434-xx] Belt
guidance B/D PA2
IC SX4a
[03094452-xx] Clamping rail B/D PA2 450
assembly SX4a
[03094433-xx] Belt
guidance B/D PA2
OC SX4a
Thick board: [03100563-xx] Clamping rail
TBO B/D PA2 450 assembly SX4a
7 Conveyor
7.7 Clamping Plate, Clamping Rails and Belt Guidance
Service Manual SIPLACE X-Serie S 06/2019 261
Side panel Input area PA1 Center PA1
DC SC
SIPLACE X4i S
A Fixed,
right
[03093767-xx] Belt
guidance A/C PA2
IC SX4a
[03094115-xx] Clamping rail A/C PA2 380
450 assembly SX4a
[03093766-xx] Belt
guidance A/C PA2
OC SX4a
Thick board: [03100554-xx] clamping rail
TBO A/C PA2 380 450 assembly SX4a
B [03094434-xx] Belt
guidance B/D PA2
IC SX4a
[03094452-xx] Clamping rail B/D PA2 450
assembly SX4a
[03094433-xx] Belt
guidance B/D PA2
OC SX4a
Thick board: [03100563-xx] Clamping rail
TBO B/D PA2 450 assembly SX4a
C Fixed,
left
[03093767-xx] Belt
guidance A/C PA2
IC SX4a
[03094115-xx] Clamping rail A/C PA2 380
450 assembly SX4a
[03093766-xx] Belt
guidance A/C PA2
OC SX4a
Thick board: [03100554-xx] clamping rail
TBO A/C PA2 380 450 assembly SX4a
D [03094434-xx] Belt
guidance B/D PA2
IC SX4a
[03094452-xx] Clamping rail B/D PA2 450
assembly SX4a
[03094433-xx] Belt
guidance B/D PA2
OC SX4a
Thick board: [03100563-xx]
Clamping rail TBO B/D PA2 450 assembly
SX4a
Removal
CAUTION
Move the conveyor sides carefully!
The clamping rails and belt guides are a key stabilizing element for the conveyor side,
which is then less stable once they have been removed.
► Move the opened conveyor sides very carefully.
Make sure that the rails are always pushed equally on the left and right.
Also make sure that you do not distort the rails.
► Use the software to move the conveyor sides into a position which allows you best access. As
an alternative, you can loosen the clamps for the relevant sides in dual conveyors.
7.2 "Loosening the Conveyor Side Clamps" [}207]
► Switch off the machine, disconnect it from the power supply and secure it to prevent
unauthorized reactivation.
1.2 "Preparatory work..." [}16]
► Only in the input, output and intermediate areas: loosen the movable idler pulley for the con-
veyor belt.
7 Conveyor
7.7 Clamping Plate, Clamping Rails and Belt Guidance
262 Service Manual SIPLACE X-Serie S 06/2019
Fig.328: Fiber optic cable transmitter/receiver
► If a fiber optic cable receiver or transmitter is fitted to the rail:
the receiver/transmitter is fixed from the outside to the side wall with a grub screw(1).
In order to remove the rail, you need to loosen this grub screw.
Fig.329: Fastening screws (example of clamping rail shown)
► Remove the screws(2) fastening the rail (1) (three or four screws, depending on the position).
NOTICE
Special screws
These are special screws with a length of 14.7 mm.
In some cases, one of the screws may be slightly shorter. In this case, make a note of the
positions, to make clear assignment easier later on. If incorrectly used, you might not be
able to move the clamping plate when it is installed.
► Carefully pull the clamping rail up and off the conveyor side.
► You may need to dismantle the transmitter/receiver fixed to the clamping rail.
Installation
► Follow the removal instructions in reverse order for installation. Also observe the following
instructions:
●
Tighten the rail fastening screws with a torque of 6 Nm. Do not tighten too much. This could
damage the thread or distort the conveyor side.
●
Check the setting for the transmitter/receiver and correct if necessary.
7.8.3 "Checking the laser light barrier" [}270]
7.8.4 "Correcting the Laser Light Barrier Setting" [}273]
●
Once you have loosened the conveyor belt, set the tension again.
7.6.2 "Setting the belt tension (conveyor belt)" [}247]