CYCLONE-User-Manual.pdf - 第142页
User Manual For Cyclone LC Programmers 142 $3014: Error: Run T est Operation terminated $3015: Error: Run T est Operation over character limit 255 $3016: Error run test operation failed $3017: Error: unable to allocated …
User Manual For Cyclone LC Programmers 141
15.3 SAP Communication Handling Related Errors
$0031: System reset occurred
$0032: System is busy with other operations.
$0033: System is busy with too many inquiries.
$0034: System has not finished initialization.
15.4 SAP Algorithm Header Operation Handling Related Errors
$0061: Undefined header operation
$0062: Operation in algorithm header has failed.
15.5 SAP Operation Related Errors
$0081: SAP operation is not supported.
$0082: Target type mismatch
$0083: SAP operation canceled
$0084: Running algorithm failure
15.6 SAP Blank Check Range and Module Related Errors
$1001: Blank Check is not supported by this algorithm.
$1002: Blank Check algorithm was not found.
$1003: Blank Check operation failed
15.7 SAP Erase Range and Module Related Errors
$2001: Erase error, algorithm not supported
$2002: Erase error, algorithm not found
$2003: Erase error, module failed or canceled
$2004: Erase error, module failed, target is still secured
$2005: Erase error, module not performed, data is preserved
15.8 SAP Program Byte, Word, and Module Related Errors
$3001: Program error, algorithm not supported
$3002: Program error, algorithm not found
$3003: Program operation failed or was canceled
$3004: Program operation failed, write protected
$3005: Program error, Data size exceeds the limit
$300A: Error during reading data range, invalid data length
$300B: Error during reading data range, invalid start address
$300C: Error during reading data range, no target power
$300D: Error during programming data range, invalid data length
$300E: Error during programming data range, invalid start address
$300F: Error during programming data range, no target power
$3010: Error reported while running the custom test application (RT) on the target.
$3011: Error displaying feature
$3012: Error programming feature
$3013: Error overlaying feature
User Manual For Cyclone LC Programmers 142
$3014: Error: Run Test Operation terminated
$3015: Error: Run Test Operation over character limit 255
$3016: Error run test operation failed
$3017: Error: unable to allocated memory during run test.
$3018: Error: Dynamic operation failure. Algorithm is not loaded. Check image settings.
$3040: Error: Program may cause the device to be secured permanently
15.9 SAP Verify Checksum Related Errors
$4001: Verify Checksum not supported
$4002: VC failed, invalid algorithm was used
$4003: VC operation failed or was canceled
$4011: VV command not supported
$4012: VV failed, invalid algorithm was used
$4013: VV operation failed or was canceled
15.10 SAP Verify Range and Module Related Errors
$5003: Error during verifying module.
15.11 SAP User Function Related Errors
$6003: Error during user functions.
15.12 SAP Trim Related Errors
$7001: Program Trim operation is not supported
$7003: No target response during a Program Trim operation
$7004: Program Trim error. Trim value is not set
$7007: Program Trim error. Trim value failed
$7008: Trim error. Trim value read failed
$7009: Trim value invalid, value is $00 or $FF
$700A: Trim value is invalid. Trim value is already programmed.
15.13 Unrecoverable Fatal Errors
$8001: Fatal Error: please contact PEmicro.
$8002: Fatal Error: please contact PEmicro.
$8003: Fatal Error: please contact PEmicro.
$8004: Fatal Error: please contact PEmicro.
$8005: Fatal Error: please contact PEmicro.
$8006: Fatal Error: please contact PEmicro.
$8007: Fatal Error: please contact PEmicro.
$8008: Fatal Error: please contact PEmicro.
$8009: Fatal Error: please contact PEmicro.
$800A: Fatal Error: please contact PEmicro.
$800B: Fatal Error: please contact PEmicro.
$800C: Fatal Error: please contact PEmicro.
$800D: Fatal Error: please contact PEmicro.
User Manual For Cyclone LC Programmers 143
$800E: Fatal Error: please contact PEmicro.
$800F: Fatal Error: please contact PEmicro.
$8010: Fatal Error: please contact PEmicro.
$8011: Fatal Error: please contact PEmicro.
$8012: Fatal Error: please contact PEmicro.
$8013: Fatal Error: please contact PEmicro.
$8014: Fatal Error: please contact PEmicro.
$8015: Fatal Error: please contact PEmicro.
$8016: Fatal Error: please contact PEmicro.
$8017: Fatal Error: please contact PEmicro.
$8018: Fatal Error: please contact PEmicro.
$8019: Fatal Error: please contact PEmicro.
$801A: Fatal Error: please contact PEmicro.
$801B: Fatal Error: please contact PEmicro.
$801C: Fatal Error: please contact PEmicro.
$8020: Fatal Error: please contact PEmicro.
$8021: Fatal Error: please contact PEmicro.
$8022: Fatal Error: please contact PEmicro.
$8023: Fatal Error: please contact PEmicro.
$8024: Fatal Error: please contact PEmicro.
$8025: Fatal Error: please contact PEmicro.
15.14 Operation Security Related Errors
$9001: Error: Exceeds image specified Program Limit
$9002: Error: Exceeds image specified Error Limit
$9003: Error: Exceeds Image specified Date Range
$9004: Error: This programming image has usage restrictions enabled. A Cyclone ProCryption
Security License is needed..
$9005: Error: This programming image has barcode enabled. Requires Cyclone FX hardware.
$9006: Error: This programming image has command RT Run Code in Test/Calibration Mode.
Requires Cyclone FX hardware.
$9007: Error: This programming image has command DF Display Feature Data. Requires Cyclone
FX hardware.
$9008: Error: This programming image has command PF Program Feature Data to
Address.Requires Cyclone FX hardware.
$9009: Error: This programming image has command OF Overlay Feature Data over File Data.
Requires Cyclone FX hardware.
$900A: Error: A Cyclone SDHC Port Activation License is needed before you can use an SD Card.
15.15 External Memory-Related Errors
$A001: Error writing to external memory card
$A002: Error formatting the external memory card
$A003: External memory card was disconnected during use
$A004: External memory card has unsupported format
$A005: External memory card has corrupted data