CYCLONE-User-Manual.pdf - 第143页
User Manual For Cyclone LC Programmers 143 $800E: Fatal Error: please contact PEmicro. $800F: Fatal Error: please contact PEmicro. $8010: Fatal Error: please contact PEmicro. $801 1: Fatal Error: please contact PEmicro. …
User Manual For Cyclone LC Programmers 142
$3014: Error: Run Test Operation terminated
$3015: Error: Run Test Operation over character limit 255
$3016: Error run test operation failed
$3017: Error: unable to allocated memory during run test.
$3018: Error: Dynamic operation failure. Algorithm is not loaded. Check image settings.
$3040: Error: Program may cause the device to be secured permanently
15.9 SAP Verify Checksum Related Errors
$4001: Verify Checksum not supported
$4002: VC failed, invalid algorithm was used
$4003: VC operation failed or was canceled
$4011: VV command not supported
$4012: VV failed, invalid algorithm was used
$4013: VV operation failed or was canceled
15.10 SAP Verify Range and Module Related Errors
$5003: Error during verifying module.
15.11 SAP User Function Related Errors
$6003: Error during user functions.
15.12 SAP Trim Related Errors
$7001: Program Trim operation is not supported
$7003: No target response during a Program Trim operation
$7004: Program Trim error. Trim value is not set
$7007: Program Trim error. Trim value failed
$7008: Trim error. Trim value read failed
$7009: Trim value invalid, value is $00 or $FF
$700A: Trim value is invalid. Trim value is already programmed.
15.13 Unrecoverable Fatal Errors
$8001: Fatal Error: please contact PEmicro.
$8002: Fatal Error: please contact PEmicro.
$8003: Fatal Error: please contact PEmicro.
$8004: Fatal Error: please contact PEmicro.
$8005: Fatal Error: please contact PEmicro.
$8006: Fatal Error: please contact PEmicro.
$8007: Fatal Error: please contact PEmicro.
$8008: Fatal Error: please contact PEmicro.
$8009: Fatal Error: please contact PEmicro.
$800A: Fatal Error: please contact PEmicro.
$800B: Fatal Error: please contact PEmicro.
$800C: Fatal Error: please contact PEmicro.
$800D: Fatal Error: please contact PEmicro.
User Manual For Cyclone LC Programmers 143
$800E: Fatal Error: please contact PEmicro.
$800F: Fatal Error: please contact PEmicro.
$8010: Fatal Error: please contact PEmicro.
$8011: Fatal Error: please contact PEmicro.
$8012: Fatal Error: please contact PEmicro.
$8013: Fatal Error: please contact PEmicro.
$8014: Fatal Error: please contact PEmicro.
$8015: Fatal Error: please contact PEmicro.
$8016: Fatal Error: please contact PEmicro.
$8017: Fatal Error: please contact PEmicro.
$8018: Fatal Error: please contact PEmicro.
$8019: Fatal Error: please contact PEmicro.
$801A: Fatal Error: please contact PEmicro.
$801B: Fatal Error: please contact PEmicro.
$801C: Fatal Error: please contact PEmicro.
$8020: Fatal Error: please contact PEmicro.
$8021: Fatal Error: please contact PEmicro.
$8022: Fatal Error: please contact PEmicro.
$8023: Fatal Error: please contact PEmicro.
$8024: Fatal Error: please contact PEmicro.
$8025: Fatal Error: please contact PEmicro.
15.14 Operation Security Related Errors
$9001: Error: Exceeds image specified Program Limit
$9002: Error: Exceeds image specified Error Limit
$9003: Error: Exceeds Image specified Date Range
$9004: Error: This programming image has usage restrictions enabled. A Cyclone ProCryption
Security License is needed..
$9005: Error: This programming image has barcode enabled. Requires Cyclone FX hardware.
$9006: Error: This programming image has command RT Run Code in Test/Calibration Mode.
Requires Cyclone FX hardware.
$9007: Error: This programming image has command DF Display Feature Data. Requires Cyclone
FX hardware.
$9008: Error: This programming image has command PF Program Feature Data to
Address.Requires Cyclone FX hardware.
$9009: Error: This programming image has command OF Overlay Feature Data over File Data.
Requires Cyclone FX hardware.
$900A: Error: A Cyclone SDHC Port Activation License is needed before you can use an SD Card.
15.15 External Memory-Related Errors
$A001: Error writing to external memory card
$A002: Error formatting the external memory card
$A003: External memory card was disconnected during use
$A004: External memory card has unsupported format
$A005: External memory card has corrupted data
User Manual For Cyclone LC Programmers 144
$A006: Faulty external memory card.
$A007: Failed during internal memory verification
$A008: Failed during external memory card verification
$A009: Error while reading external memory card for image pointer
$A00A: Error: Read-only lock is enabled in the external memory card.
15.16 Serial Number Related Errors
$B001: Error erasing the serial number storage
$B002: Error writing serial number
$B003: Serial number is over the limit, up to 255 can be supported at a time
$B004: Error loading Serial Number structure from reset
$B005: Error during serial number structure update
$B006: Error: Serial Number structure was not found.
$B007: Error: Serial Number structure is invalid
$B008: Error programming Serial Number to target.
$B009: Error obtain Serial Number from storage.
15.17 Download Count Related Errors
$C001: Error erasing the download counts storage
$C002: Error writing the download counts
$C003: Download counts is over the limit, up to 255 can be supported at a time
$C004: Error trying to convert the download counts structure
15.18 System Hardware/Firmware/Logic Recoverable Errors
$D001: Error: Firmware does not exist
$D002: Error: Firmware update is not allowed
$D003: Error: Firmware update has failed
$D004: Error: There is a firmware mismatch during firmware update.
$D005: Error: Voltage calibration failure.
$D006: Error: Cannot either read or write disk