CYCLONE-User-Manual.pdf - 第61页
User Manual For Cyclone LC Programmers 61 Figure 6-24: Manage Images Utility Upon opening a selected Cyclone in the Cyclone Control GUI, the user is provided in the first tab with a list of the images currently on the un…
User Manual For Cyclone LC Programmers 60
In the case of a Cyclone present on a different network (i.e., not displayed automatically in the
drop-down list), the user may specify its IP address by using the Specify Cyclone checkbox and
typing the identifier of the Cyclone.
Click on "Connect" to access the specified Cyclone. A click on the "Apply Changes" button will
then store the image on the selected Cyclone.
6.1.11 Store Image To Disk
“Store Image To Disk” allows the current configuration to be saved onto the hard drive. The image
can then be transferred to the Cyclone’s internal flash (or an installed SD card) via the Manage
Images Utility.
6.1.12 Save Cyclone Configuration
“Save Cyclone Configuration,” in the file menu, allows the user to save the configuration into a file,
which may be used for future reference, e.g., comparing the Cyclone contents with the file to see if
they are the same.
6.1.13 Load Cyclone Configuration
“Load Cyclone Configuration” in the file menu allows the user to load a configuration that has
previously been saved in order to create a new image.
6.2 Managing Multiple SAP Images
The Cyclone Control GUI, shown below in Figure 6-25, allows the Cyclone to store and manage
multiple images in the Cyclone’s internal memory and - on a Cyclone FX or a Cyclone LC with the
SDHC Port Activation License installed - on any compatible memory card that is loaded into the
SDHC port (CYCLONE programmers require SDHC License Activation).
Any programming images that have been created and saved to the disk using the Cyclone Image
Creation Utility may be loaded collectively onto the Cyclone, with one exception. Encrypted images
may only be loaded if their ImageKey resides on the Cyclone.
User Manual For Cyclone LC Programmers 61
Figure 6-24: Manage Images Utility
Upon opening a selected Cyclone in the Cyclone Control GUI, the user is provided in the first tab
with a list of the images currently on the unit’s internal memory which are marked with a Storage
Area label of "Internal". A list of images on any installed SDHC card will also be displayed with a
Storage Area label of "External"
You can add images with the "Add Image Internal" button under the images panel. These images
will appear with a "Status" label of "Ready to Store". These images are not yet in the Cyclone, the
"Apply Changes" button will have to be clicked for the changes to take effect.
If the Cyclone’s SDHC port is activated, the user can also add images to the external memory by
using the drop-down next to the "Add Image Internal" button and selecting "External". Alternatively,
once an image has been added to the proposed changes and it is in the "Ready to Store" state, the
user may right click on the image and click the "Switch storage to External" option.
In Figure 6-25, note that the Encryption area displays “Encrypted” or “None” to indicate whether
or not each programming image is has been encrypted. The Status area will display “Key
Missing!” if the ImageKey for an encrypted image has been removed from the Cyclone.
For information on how to encrypt SAP Images and the significance of the ImageKey, please refer
to Section 6.1.8.1 - SAP Image Encryption. For an overview of Cyclone SAP Image encryption
and the process of using encrypted images in the production process, please see CHAPTER 11 -
SAP IMAGE ENCRYPTION.
6.2.1 Delete Images From Internal/External Memory
Any images that are already stored on the Cyclone or installed SD card can be deleted by just
clicking on the trash can on the left of the image or by selecting the image and clicking the Delete
key on the keyboard, the image status will be changed to "Ready to Erase.” The image will be
removed after "Apply Changes" is clicked.
6.2.2 Add/Remove Images From The Commit Changes Panels
Once the images that you wish to load appear in the images tab, you must press “Apply Changes”
User Manual For Cyclone LC Programmers 62
to update the Cyclone accordingly. No actual updates will occur to the Cyclone’s internal/external
memory or installed SD card until the user selects “Apply Changes.
Note: Any SAP images that are already stored on older Cyclone models such as the Cyclone PRO,
MAX, Renesas, STMicro, or Cyclone LC ARM - Rev. A/B (or on a CompactFlash card in one of
those units, if applicable) can not be removed individually and can only be erased by removing all
images.