CYCLONE-User-Manual.pdf - 第89页
User Manual For Cyclone LC Programmers 89 -firmwareupdate=[firmware update mode] Set the firmware update mode to “auto”, “dontupdate”, “forceupdate”. The default mode is “auto.” -help Display a list of available commands…
User Manual For Cyclone LC Programmers 88
-putdynamicdata=[cyclone number],[address],[data]
ONLY SUPPORTED BY CYCLONE FX OR THE CYCLONE CONTROL SUITE ADVANCED LICENSE.
Performs programming of dynamic data with the selected Cyclone unit. [cyclone number] is the index of the
connected Cyclone in the order in which it was entered. [address] is the starting memory address. [data] are
the bytes of data to be programmed. All values should be in hexadecimal format. No more than 255 bytes
may be programmed this way.
A Cyclone unit may only use this command after it has performed its “-launchimage” command.
If the target is reset after programming the image, “-putdynamicdata” will fail. The workaround to this is to
execute a second blank image that will re-load the algorithm before using this command.
-putdynamicstring=[cyclone number],[address],[string]
Performs programming of dynamic data with the selected Cyclone unit. [cyclone number] is the
index of the connected Cyclone in the order in which it was entered. [address] is the starting
memory address. [string] is the data in string format. No more than 255 bytes may be programmed
this way.
A Cyclone unit may only use this command after it has performed its “-launchimage” command.
If the target is reset after programming the image, “-putdynamicstring” will fail. The workaround to
this is to execute a second blank image that will re-load the algorithm before using this command.
-showproperties=[category],[image id if applicable]
List all available properties in a [category] in the open Cyclones or a stored SAP image by using
the [image id if applicable] argument. Refer to the header file for a list of valid category and
property names. Using an empty string as the [category] value will return the available categories.
-addimageinternal=[filename]
Add a specific programming image to the internal memory of the open Cyclones. [filename] is the
path and filename of the image to be programmed into the Cyclones.
-addimageexternal=[filename]
ONLY SUPPORTED WITH CYCLONE FX OR THE CYCLONE MEMORY EXPANSION LICENSE.
Add a specific programming image to the external memory of the open Cyclones. [filename] is the
path and filename of the image to be programmed into the Cyclones.
-eraseallinternalimages
Preform a format of the internal memory connected to the open Cyclones. This will cause all
internal images to be erased.
-eraseallexternalimages
Preform a format of the external memory connected to the open Cyclones. This will cause all
external images to be erased.
-eraseimage=[image name or number]
Erase an individual image from the open Cyclones. The image can be identified by image name or
by image number.
-listserialfiles
List Serial Files in Cyclone
-addserialfile=[file path]
Add Serial File to Cyclone
-deleteserialfile=[object ID or display index]
Delete Serial File from Cyclone. Can be deleted by ID or by display index.
User Manual For Cyclone LC Programmers 89
-firmwareupdate=[firmware update mode]
Set the firmware update mode to “auto”, “dontupdate”, “forceupdate”. The default mode is “auto.”
-help
Display a list of available commands.
The following command-line parameters require a Cyclone FX, or a Cyclone LC with the
ProCryption Security Activation License.
-listencryptionkeys
List Encryption Key Files that reside on Cyclone
-addencryptionkey=[file path]
Add ImageKey file to Cyclone. The file path is the path to the ImageKey.
-deleteencryptionkey=[object ID or display index]
Delete ImageKey File from Cyclone. Can be deleted by ID, or by display index number (-
listencryptionkeys returns a numbered list of ImageKeys; the display index corresponds to these
numbers).
8.3.3 Examples
The commands should be separated by a space. Every command starts with a “-” character,
arguments follow the “=” character.
8.3.3.1 Typical Usage
This example connects to a single Cyclone identified by its IP address 10.0.1.1 and executes its
first image. This is the most common usage of the Cyclone Control Utility.
This example connects to a single Cyclone enumerated on USB1 and executes its first image.
8.3.3.2 Controlling Multiple Cyclones
This example connects to three separate Cyclone units. Two units are connected via USB
(10.0.1.1 and 10.0.1.2) and the third is connected via Ethernet (10.0.1.3). The three Cyclone units
are configured to execute image #2.
CycloneControlConsole.exe –cyclone=10.0.1.1 –launchimage=1
CycloneControlConsole.exe –cyclone=USB1 –launchimage=1
CycloneControlConsole.exe –cyclone=USB1,10.0.1.2,10.0.1.3 –
launchimage=2
User Manual For Cyclone LC Programmers 90
8.3.3.3 Programming Dynamic Data
Here, a Cyclone is connected via the Serial port and is identified by name rather than IP address.
After executing image #1 on both cyclones, we write 6 bytes of dynamic data on Cyclone #2
starting at address 0x1080. Note that all parameters for the “-putdynamicdata” command should
be hexadecimal values.
8.3.3.4 Executing more than 1 image on the same Cyclone
Two Cyclone units are connected via Ethernet and both Cyclone units execute their first image.
Afterwards, the both Cyclones will execute their second image.
This example is useful when the processor’s code is split into two separate images. For example,
one image could contain the bootloader while the second image contains the main application
code.
8.3.3.5 Image Management – Modifying External Images
In this example, a Cyclone unit is connected via USB and it has an image stored on its external
memory card. The external image is erased and a new one is added. This type of command
should only be used when an image needs to be updated.
8.3.3.6 Image Management – Modifying Images on Two Cyclones in Parallel
In this example, two Cyclone units connected via USB have their images erased and a new image
is added to both Cyclone units. This type of command should only be executed when images need
to be updated.
8.4 Cyclone Control GUI
As part of the Cyclone Control Suite, PEmicro includes the Cyclone Control GUI, a graphical
application that gives the users access to all the functions of the latest Cyclone Control.
Note: This new application replaces the previous Image Manager Utility and Cyclone Config IP Utility.
The Cyclone Control GUI allows users to add and remove images from the internal Cyclone
memory as well as from the external memory cards. The utility also allows the user to view and edit
Cyclone properties, to view the Cyclone LCD remotely, to view and add Cyclone Licenses, and to
CycloneControlConsole.exe –cyclone=CycloneFX_Table1,CycloneFX_Table2
–launchimage=1 –putdynamicdata=2,1080,45,44,49,53,4F,4E
CycloneControlConsole.exe –cyclone=CycloneFX_1,CycloneFX_2
–launchimage=1 –launchimage=2
CycloneControlConsole.exe –cyclone=USB1 –eraseallexternalimages
–addexternalimage=c:\images\externalImage1.SAP
CycloneControlConsole.exe –cyclone=USB1,USB2 –eraseallinternalimages
–addinternalimage=c:\images\Image1.SAP