CYCLONE-User-Manual.pdf - 第94页
User Manual For Cyclone LC Programmers 94 Figure 8-6: Image Properties Window Properties like the image name, the voltage settings, image CRC, encryption info, and all current serial numbers can be viewed from this windo…
User Manual For Cyclone LC Programmers 93
Figure 8-5: Changing Storage Area - Right Click or Drop-Down Selections
Note: An image displayed in blue is not yet committed, so disconnecting from the Cyclone before the
“Apply Changes” button is clicked will discard any changes not committed.
Erasing an image can be done by clicking on the trashcan icon at the left of the image, it can also
be done by selecting the image and click the DELETE key on the keyboard. The “Apply Changes”
buttons must be clicked for any changes to the Cyclone to take place.
To format the external memory card click on the “Format External Card” button. This will erase all
image information stored in the external card.
8.4.2.1.1 Categories
The following information is displayed for each image in the Images Tab:
Delete Image - Clicking the trash icon will designate an image for deletion. Apply Changes
must be clicked to execute this action.
Number - Displays the Cyclone’s numbering for each image.
Name - Displays the Image Name.
CRC - Displays the CRC value for each image.
Storage Area - “IN” designates that the image is stored in the Cyclone’s internal memory;
“EX” designates that it is stored in external memory (SDHC Card).
Status - This displays whether the image is “Stored” on the Cyclone, “Ready to store”, or
“Ready to erase”. A stored image that is encrypted but missing its ImageKey will always show
“Key Missing!” to indicate that the user must provision the Cyclone with this key in order to
program that encrypted image.
Encryption - Displays “Encrpyted” for encrypted images, and “None” for images that have not
been encrypted.
For more about encrypted programming images, please see Section 6.1.8 - ProCryption
Security License Features.
8.4.2.1.2 View Image Properties
From this tab a user can also access the image properties of images in the Cyclone. Just right click
on the image then click on “View Image Properties” and a window with public image properties will
pop up.
User Manual For Cyclone LC Programmers 94
Figure 8-6: Image Properties Window
Properties like the image name, the voltage settings, image CRC, encryption info, and all current
serial numbers can be viewed from this window. Use this feature to make sure your image settings
are correct or check that the serial numbers change accordingly.
8.4.2.2 Properties Tab
Figure 8-7: Properties Tab
The properties tab shows all the network, Cyclone and image properties. It also shows properties
for the supported features of the Cyclone. From this tab the Cyclone firmware and logic versions,
the cyclone type, and the number of images are available. Also from this tab some of the
properties can be modified.
8.4.2.2.1 Modifying A Cyclone Property
Some properties in the Cyclone are modifiable. Only the properties that can be modified will show
three dots to the right of the property when the property is selected.
Figure 8-8: Modifying Cyclone Properties
Clicking on the three dots or double clicking on the property value will bring up an edit window.
Write the new property value and click “OK”, the property window will refresh and the value
User Manual For Cyclone LC Programmers 95
showed will be the updated value of the property.
8.4.2.3 The Remote Display Tab
This tab will show the current display of the Cyclone. The utility checks every second for changes
in the display and updates the image to the current display. This image is also clickable so clicks
on the virtual screen are also registered by the Cyclone.
Figure 8-9: Remote Display & Control of Cyclone Screen
8.4.2.4 Licenses Tab
New licenses can be added to the Cyclone using the Licenses tab. Clicking on “Add New License”
will prompt the PEmicro License Activation Form. This form takes in the Installation Code for a
product and can automatically validate and register the installation.
This tab also shows the current licenses active in the Cyclone, including the Cyclone Control
Advanced Automation License, SDHC Port Activation License, and ProCryption Security
Activation License.
Figure 8-10: Licenses Tab
8.4.2.5 Serial Files Tab
The Serial Files Tab displays any Serial Files that are on the Cyclone. Serial Files can be “deleted”
with the “Delete Serial File” button, but in this case it simply means that they will not be displayed.
An image file that uses a “deleted” Serial File will simply cause the file to re-appear and resume
with its next serial number.
Note: Older images may reference Serial Files that are image-specific and cannot be shared among
images (like current Serial Files). These will not appear in the Serial Files tab. The Cyclone menu