c900773.R02_EN.pdf - 第125页
6 ． Additional Function 9 Assembly of Standard DP Rotation Nozzle PART LIST No. PART NO. P ART NAME Q ’ TY No. PART NO. PART NAME Q ’ TY 1 LE6-M5FBV-00x O-RING 1 9 LE7-M5F18-00x COLLAR 1 2 LE7-M5F11-00x HOLDER,NOZZLE 1 1…
6．Additional Function
8
２ｍｍ
Apply the silicon grease to the screw axis with
the cotton swab.
(Up to approximately 2 mm from the lower
bearing.)
※Do not apply the silicon grease any wider
than 2 mm from the lower bearing.
Place the O-ring to the screw axis.
LE6-M5FL4-000 / O-RING (VITON)
Align the V-shape cut on the lower bearing to the projection
inside of the screw pump, and insert the screw axis to the
screw pump.
Insert the screw axis all the way to the end, and place and
secure the screw retainer cap.
6．Additional Function
9
Assembly of Standard DP Rotation Nozzle
PART LIST
No. PART NO. PART NAME Q
’
TY No. PART NO. PART NAME Q
’
TY
1 LE6-M5FBV-00x O-RING 1 9 LE7-M5F18-00x COLLAR 1
2 LE7-M5F11-00x HOLDER,NOZZLE 1 10 LE7-M5F19-00x CAP,LOCK 1
3 LE7-M5F12-00x BODY,MAIN 1 11 LE7-M5F1A-00x O-RING 2
4 LE7-M5F13-00x PIPE,FITTING 1 12 LE7-M5F1C-00x O-RING 1
5 LE7-M5F14-00x CAP,LOCK 1 13 LE8-M5F70-xxx TWIN NOZZLE SEL 1
6 LE7-M5F15-00x ADAPTER 1 14 LG0-M71GH-10x SCREW,SET 1
7 LE7-M5F16-00x STOPPER,TWIN 1 15 LG0-M71GK-30x SCREW,SET 1
8 LE7-M5F17-00x PIN,PARALLEL 1
6．Additional Function
10
Follow the instructions below and place O-RING onto the dispense nozzle.
Ser O-RING onto COLLAR.
＊It is recommended that O-RING should be
replaced once a month.
COLLAR (LE7-M5F10-00x)
O-RING (LE7-M5F1A-00x)
Ser O-RING onto COLLAR. (on the other
end)。
＊It is recommended that O-RING should be
replaced once a month.
COLLAR (LE7-M5F10-00x)
O-RING (LE7-M5F1A-00x)
Set COLLAR onto BODY, MAIN.
Apply grease to a cotton swab and lubricate the
inside of O-RING.
BODY, MAIN (LE7-M5F12-00x)
Silicon Grease (LG1-M89AB-00x)
Set COLLAR onto BODY, MAIN.
Adjust the positioning slit on COLLAR to meet
the positioning pin on BODY, MAIN.
１
2
3
4