c900773.R02_EN.pdf - 第67页
3 Mechanical Section 3-27 Fixed Base (X) is changed according to the PCB size. Fixed Base ＝ PCB Origin Multi Conveyor PCB clamp position can be adjusted flex ibly regardless the board size. M20 M10 PCB is fixed at t he p…
3 Mechanical Section
3-26
Specified Lubricants
■ M10/ M20
PART MANUFACTURER PRODUCT NAME
X/Y Axis
Ball Screw
Linear Guide
THK AFA Grease
NOK NBU15
KYODO YUSHI Multemp
Z Axis
Ball Screw
Linear Guide
THK AFB Grease
Showa-Shell Albania Grease No. 2
Idemitsu Daphnis Eponex Grease No. 2
R Axis
Spline Shaft
THK AFB Grease
Showa-Shell Albania Grease No. 2
Idemitsu Daphnis Eponex Grease No. 2
Silicone Grease for
Nozzle
Three Bond #1855 Silicone Grease
■Purchasable Grease from YAMAHA
Part Name
Part No. Remark
GREASE,AFA LG0-M86A3-00X AFA Grease
GREASE,AFB LG0-M86A4-00X AFB Grease
GREASE GUN ASSY. LE6-M8910-00X Grease Gun and Nozzle set
GREASE,SILICON LG0-M89AB-00X Silicone Grease
NOTE: AFA grease is superior to AFB grease and can be used for all the axes.
NOTE: Order placement for lubricants can be accepted only if the machine is delivered inside Japan. For locations
overseas, please consultant the agency from which you purchased the machine.
NOTE: Please specify Part No.
to place an order.
3 Mechanical Section
3-27
Fixed Base (X) is changed
according to the PCB size.
Fixed Base＝PCB Origin
Multi Conveyor
PCB clamp position can be adjusted flexibly regardless the board size.
M20
M10
PCB is fixed at the position where the PCB
center matches to the camera center.
3 Mechanical Section
3-28
Manual Operation
Actuator and Each Sensor
DO Screen
DI Screen
PCB Sensor
(
Front Left
)
PCB Sensor (Real Left)
PCB Sensor (Front Right)
PCB Sensor
(
Rear Ri
g
ht
)
Q
uick Clam
p
(
Front- Left
)
Quick Clamp (Front Right)
Q
uick Clam
p
(
Center Front
)
Q
uick Clam
p
(
Cente
r
-Rear
)
Quick Clamp (Rear-Right)
Quick Clamp (Rear-Left)