DECAN_S1_Administrator′s_Guide(Eng_Ver1.5)_Print.pdf - 第152页
6-38 Next Generation, Multi-Functional Plac er DECAN S1 Administrator’s Guide Run “SmartSM.exe” after comp leting modifications to the configuration file. 6.6.2. Barcode Position Figure6.9 Order of ‘Barcode Position’ Dia…
6-37
Board Definition
Memo To activate the <Bar Code> menu, check the <Use 2D Barcode>
checkbox in <Sys.Setup>.
Setup path: <Sys.Setup> → <Pref.> → <General> → <Use 2D
Barcode>
Memo When using 1D barcode or using no barcode (only using the IT
functions), set as follows.
When using 1D barcode
In the [Option] item of the “C:\SmartSM\bin\SmartSM.ini” file,
set the QFEEDER to 1 and the LotTracking to 1, and Usebarcode
to 0.
When using no barcode (only using the IT functions)
In the [Option] item of the “C:\SmartSM\bin\SmartSM.ini” file,
set the IQFEEDER to 1 and the LotTracking to 0, and
Usebarcode to 0.
6-38
Next Generation, Multi-Functional Placer DECAN S1 Administrator’s Guide
Run “SmartSM.exe” after completing modifications to the
configuration file.
6.6.2. Barcode Position
Figure6.9 Order of ‘Barcode Position’ Dialog Box Execution
6-39
Board Definition
Figure6.10 Barcode Position’ Dialog Box
<1.Use> check box
Check the 2D barcode function to use it.
<2. Bar Code Position> group
Indicates the position of the 2D barcode.
<Board> Area
Teaches the 2D barcode position attached to a board using the fiducial camera
selected from the <3. Teach> area or performs setup for 2D barcode attachment to
a board.
<X/Y> Edit Box
Sets the X/Y coordinate of a 2D barcode.
<Z> Edit Box
When attaching a 2D barcode to a board, sets the Z-axis coordinate in order to
press and attach a 2D barcode to a board with a head spindle.
<Inspection> Check Box
Selecting this check box will recognize the 2D barcode attached to a board.
<Placing> Check Box
Selecting this check box will attach a 2D barcode to a board using the
machine.
Part
Enabled when the <Placing> check box is selected. Displays the part supplied
by the feeder selected from the <Feeder> combo box.
<Feeder> Combo Box
Enabled when <Placing> check box is selected. The feeder supplying the part
registered by selecting the <BarCode> check box from the Common Data