DECAN_S1_Administrator′s_Guide(Eng_Ver1.5)_Print.pdf - 第545页

Diagnosis & Utility & Production Management

15-78

Next Generation, Multi-Functional Placer DECAN S1 Administrator’s Guide

Memo The list of the nozzles for which nozzle tip contamination can be

checked is as follows:

CN020, CN030, CN040, CN065

When these functions are enabled, the production quality may be

improved, but productivity may decrease slightly. When using this

function, please contact our C/S.

<Tip Inspection> check box

Tick this check box to automatically check the center of rotation (COR) of the

nozzle tip.

When this check box is ticked, the COR of the nozzle is inspected when the nozzle

adsorbs in ANC, and the measured value is reflected to the pick-up offset of the

feeder. By compensating the pick-up position of the feeder, it is possible to

prevent the parts from not being adsorbed. (Prevention of missing parts)

When the nozzle is attached to ANC, the changed pickup offset of the feeder is

reset to the existing value.

Memo The list of the nozzles for which COR of the nozzle tip can be

checked is as follows:

CN015, CN020, CN030

Memo To use the “COR Check” function, System Constant setting should

first be performed. Please contact our CS or local representative

office.

 <OK> button

Saves the data and closes the screen.

 <Cancel> button

Ignores the data and closes the screen.

Diagnosis & Utility &

Production

Management