DECAN_S1_Administrator′s_Guide(Eng_Ver1.5)_Print.pdf - 第61页
2-7 Structure of MMI Menu PCB D/L T ransmits PCB operation data to the equipment. It is possible only when the equipment status is ‘Finish’. Pd. Info Checks the number of p ickup s, pla cements, and pickup e rror rat…
2-6
Next Generation, Multi-Functional Placer DECAN S1 Administrator’s Guide
Cancel
Closes the dialog box for the Board, Part, Feeder, and Step.
Layout
Indicates the shape of PCB and placement position of the parts.
2.1.2.2.2. The sub menu tool-bars of the production menu tool-bar
Start
Starts operation after downloading PCB.
Stop
Stops operation.
Cont.
Continues previous operation..
Finish
Finishes the downloaded operation completely.
T/ F Cnt
Sets the position of the pocket to start picking up components from the Tray Feeder.
2-7
Structure of MMI Menu
PCB D/L
Transmits PCB operation data to the equipment. It is possible only when the
equipment status is ‘Finish’.
Pd. Info
Checks the number of pickups, placements, and pickup error rates by head, nozzle,
and feeder.
Flux
Perform setup for the warning message related to the operation of the flux module.
2.1.2.2.3. The sub menu tool-bars of the Utility menu tool-bar
Print
Used to print a PCB file or system data.
Pd. Info
Reports various production management data for the equipment(PCB information, and
Log information).
Copy ..
Use it to copy the existing PCB file data to other PCB files.
2-8
Next Generation, Multi-Functional Placer DECAN S1 Administrator’s Guide
File Man
Use it to copy, delete, rename and clear the files related to MMI.
By Pass
Use it to bypass a PCB on the conveyor without placement operation.
Warmup
Warms up the driving axis after power supply.
2.1.2.2.4. The sub menu tool-bars of the Diagnosis menu tool-bar
I/O
Check the I/O status.
Conveyor
Checks the Stopper, Backup Table, Hole/Edge Fixture, and Conveyor Flow.
Light
Checks the Camera Light.
Va c uum
Checks the Vacuum of each head