DECAN_S1_Administrator′s_Guide(Eng_Ver1.5)_Print.pdf - 第413页

14-31 Machine Calibration 14.3.5. Conveyor Calibration Set the Home Offset of the st ation in the conveyor and the Offset between stations. T each the position of the stopper and work sensor in the station to m easure th…

100%1 / 632
14-30
Next Generation, Multi-Functional Placer DECAN S1 Administrator’s Guide
Ref. The reference value for the calibration of the Other Fid. Cameras is as
follows:
Gantry 1
Offset X: -263 ~ -261 (mm)
Offset Y: -1 ~ 1 (mm)
14-31
Machine Calibration
14.3.5. Conveyor Calibration
Set the Home Offset of the station in the conveyor and the Offset between stations. Teach
the position of the stopper and work sensor in the station to measure the information
needed to bring the PCB board in and out.
Calibration is made upon initial installation of the machine. The recalibration of transport
rail should be performed when mechanical adjustments to the transport rail occur.
Figure14.8 "Conveyor Calibration" dialog box
<Station> combo box
Select the Station.
<Position> group
Input the position of the fiducial mark of the selected station. First click the <Home
All> button to enable this edit box and find the home position for all axes related to the
conveyor.
Ref #1: the first fiducial mark of the selected station
Ref #2: the second fiducial mark of the selected station
<Home> group
<Home All> button: Finds the homes of all axes.
<Teach> group
<Light> button
Set the lighting value. Set the value by adjusting the sliding bar.
<Move> button
Moves the fiducial camera of the corresponding gantry to the position of the
14-32
Next Generation, Multi-Functional Placer DECAN S1 Administrator’s Guide
fiducial mark selected from the Grid group.
<Get> button
Apply the coordinate value of the current position as the selected fiducial mark
position.
<Fiducial Teach…> button
Teaches the fiducial marks of the selected Station. Please refer to“6.3 Fiducial Mark
Setup” for more information.
<Edge Offset Teach…> button
Used to measure the offset between the fiducial mark and edge accurately.
Figure14.9 “Teach Rails Edges” dialog box
<Edge Offset> edit box
Means the distance from the center of the fiducial mark to the edge of the rail.
Teaching must be performed after selecting this point using a mouse.
<Move> button
The <Move Cam> button can be clicked after first selecting a station and next
selecting the <Edge Offset> edit box. Then the downward camera (Fiducial
Camera) is moved to the center of the selected fiducial mark of the selected
station.
<Get> button
Apply the coordinate value of the current position as the selected fiducial mark
position.
<Light> button
Set the lighting value. Set the value by adjusting the sliding bar.
<Update> button
Applies the changed value and closes the dialog box.
<Scale Teach...> button
Teaches the Y offset of the conveyor fiducial mark.