DECAN_S1_Administrator′s_Guide(Eng_Ver1.5)_Print.pdf - 第173页
7-9 Part Registration <Head> selection control Of the entire image, it show s an image in the area corresponding to the selected head in the SMV ision window . <5. Part Data> group Set the data including …
7-8
Next Generation, Multi-Functional Placer DECAN S1 Administrator’s Guide
7.1. New Part Registration
Registers new component. When this button is clicked on, the following dialog box is
displayed.
Figure7.3 ”Edit Profile / Part” dialog box
<1. Part Name> edit box
Set the component name. Ensure that the component name having more than 32
Alphabet characters (16 characters in Korean) is not entered.
(When using the “Duplicate” function or when importing component information
from another PCB file.)
<2. Align Type> combo box
Select the align type. Automatically setup to “Vision”.
<3. Package Group> combo box
Select the component group.
<Package List> combo box
Displays the component data list selected in <2. Align Type> and <3. Package
Group>. From the list, select the part most similar to the part to be registered.
<4. Image View> group
Allows the image displayed in the SMVision window to be selected.
<Full Image> check box
Selecting this check box will show the entire image of the selected gantry in the
SMVision window.
7-9
Part Registration
<Head> selection control
Of the entire image, it shows an image in the area corresponding to the selected
head in the SMVision window.
<5. Part Data> group
Set the data including the component size.
<X> edit box
Set the component size in X direction.
<Y> edit box
Set the component size in Y direction.
<Thickness> edit box
Set the height (thickness) of the component.
<Depth Z> edit box
Set the depth of the groove on top of the component. Unless warranted by a
special purpose, set to “0”. For a part that cannot be picked up at its top surface,
this parameter must be set.
1: Nozzle
2: Pickup surface of part
3: Bottom surface of part
4: Placement surface of part
7-10
Next Generation, Multi-Functional Placer DECAN S1 Administrator’s Guide
Caution If Depth Z is set, it is reflected in the pickup height (Pickup
Z). Therefore, when Depth Z is set, do not modify Pickup Z
manually in the ‘Feeder Base’ dialog box.
For parts whose pickup height must be modified such as
parts fed by embossed tape, modify the ‘Pickup Data’ of the
common parameter of the part. (Refer to “Pickup Data” tab
dialog box in the “7.1 New Part Registration”.)
<Register> button
Adds the set component data to the PCB part list.
<Close> button
Closes the dialog box.
<5. Align Data> group
Set the component align data. The edit screen for the align data selected in <2. Align
Type> and <3. Package Group> are displayed in this group.
The display is varied according to the data selected in the <3. Package Group>. Please
refer to section “7.1.2 ~ 7.1.8” for more information.
<Common Data> button
Sets the component data related to the machine. When this button is clicked on, the
following dialog box is displayed and the name of the button is changed to “Align
Data”.