DECAN_S1_Administrator′s_Guide(Eng_Ver1.5)_Print.pdf - 第220页

7-56 Next Generation, Multi-Functional Plac er DECAN S1 Administrator’s Guide Memo In the following cases, the ‘flip check’ function cannot be used.  The top and bottom shapes of the part are the same.  The image of th…

7-55

Part Registration

7.1.2.5. Trimmer component data setting

Set align data for Trimmer components.

Figure7.17 “Package Group =Trimmer” dialog box

 <Camera No.> combo box

Select the camera to recognize the component. Please refer to “7.1.1 Common Align

Data” for more information.

 button

Set the light for the camera to recognize the component. Please refer to“7.1.1

Common Align Data” for more information.

 <Size> group

Set the Align size.

 <Body X> edit box

Set the component size in X direction.

 <Body Y> edit box

Set the component size in Y direction.

 <Up Lead L> edit box

Set the component size in Y direction.

 <Down Lead L> edit box

Set the length of the lower lead in Y direction.

For other setups, please refer to“7.1.1 Common Align Data”.

7-56

Next Generation, Multi-Functional Placer DECAN S1 Administrator’s Guide

Memo In the following cases, the ‘flip check’ function cannot be used.

 The top and bottom shapes of the part are the same.

 The image of the top and bottom surfaces is not contrasted

clearly.

 <Option> group

Set the align option data.

 <Rough Check> check box

When recognizing a part, if a recognition error occurs because the shape of the

part to be recognized does not match with the vision algorithm data, select this

check box.

If this check box is selected, even if a certain shape of the part to be recognized is

more or less incorrect when compared with the vision algorithm data, the part is

recognized correctly in case it is identical when checking the layout of the entire

parts.

Please refer to “7.1.1 Common Align Data” for more information.

 <Move> button

Performs component pickups or moves to the stage camera. Please refer to “7.1.1

Common Align Data” for more information.

 <Test> button

Tests component recognition by using the set align data. Please refer to “7.1.1

Common Align Data” for more information.

 <Image Capture> button

Helps to specify the optimum lighting value. The lighting is gradually changed

automatically and the images are saved. The user can check the best image and

identify the optimum lighting value. Please refer to“7.1.1 Common Align Data” for

more information.

7-57

Part Registration

 <Corner Check> button

Even though the shape of the part is rectangular, it is curved differently compared to

the shape of general leads. Therefore, it is applied to a part that is difficult to register.

Clicking this button will display the following dialog box to set the corner type. Used

only for Trimmer parts

 <Top Left set> check box

If the upper left corner of the part is a round shape with a bright colored pattern,

select this check box.

 <Top Right set> check box

If the upper right corner of the part is a round shape with a bright colored pattern,

select this check box.

 < Bottom Left set> check box

If the lower left corner of the part is a round shape with a bright colored pattern,

select this check box.

 < Bottom Right set> check box

If the lower right corner of the part is a round shape with a bright colored pattern,

select this check box.

 <Use Corner Check> check box

When using the <Use Corner Check> corner check algorithm, select this check

box.

 <Corner Check Algorithm> check box

Select the vision algorithm to be used to perform the corner check.