DECAN_S1_Administrator′s_Guide(Eng_Ver1.5)_Print.pdf - 第19页
Preface v Be sure to tighten the anti-loosening nut. After the equipme nt has been leveled, be sure to lock the anti-loosening nut tightly using the extensio n handle. Be careful when cleaning the cover . Dip a clean ult…
Next Generation, Multi-Functional Placer DECAN S1 Administrator’s Guide
iv
Do not open the door during operation.
Part where this label is attached contains
moving parts, it is very dangerous if the user
open the cover while operating.
As the current with high-voltage flows inside
the cover or in the area near the switch,
take precautions against electric shock.
Be sure to turn off the main switch in the
left-lower cover of the rear side before
maintenance.
Do not remove the safety device. It could
cause personal injuries or serious
problems.
Do not put a hand in during operation.
Part where this label is attached contains
moving parts, it is very dangerous if the user
disassembles any part or opens the cover
while operating.
Stop the machine before servicing.
Stop the machine before maintenance or
error troubleshooting.
Preface
v
Be sure to tighten the anti-loosening nut.
After the equipment has been leveled, be
sure to lock the anti-loosening nut tightly
using the extension handle.
Be careful when cleaning the cover.
Dip a clean ultra-fine fiber cloth in the
specified cleaning liquid, and wipe the
acrylic cover of the door gently using the
cloth.
The following actions may damage the anti-
static cover. For this reason, please handle
carefully.
Cleaning using hydrogen carbonate,
ester, ketone, acid, strong alkali or
chemicals similar to these
Cleaning by rubbing the acrylic cover
applying strong force with an ultra-fine
fiber cloth
Next Generation, Multi-Functional Placer DECAN S1 Administrator’s Guide
vi
Rear View of the Machine
The following labels are attached on the rear part of this machine.
Figurei.2 Safety labels attached on the rear part of the machine
Do not modify the door key.
Unauthorized modification of the door key is
prohibited. It may be dangerous.
Do not open the door during operation.
Part where this label is attached contains
moving parts, it is very dangerous if the user
open the cover while operating.
The power supply is set to AC 380V before
delivery. Check whether the supply power
and machine power supply setup are
correct.