DECAN_S1_Administrator′s_Guide(Eng_Ver1.5)_Print.pdf - 第222页

7-58 Next Generation, Multi-Functional Plac er DECAN S1 Administrator’s Guide  Fine The boundary of the corner is recogni zed precisely . It is recommended that this method be selected.  Rough The value for the boundar…

7-57

Part Registration

 <Corner Check> button

Even though the shape of the part is rectangular, it is curved differently compared to

the shape of general leads. Therefore, it is applied to a part that is difficult to register.

Clicking this button will display the following dialog box to set the corner type. Used

only for Trimmer parts

 <Top Left set> check box

If the upper left corner of the part is a round shape with a bright colored pattern,

select this check box.

 <Top Right set> check box

If the upper right corner of the part is a round shape with a bright colored pattern,

select this check box.

 < Bottom Left set> check box

If the lower left corner of the part is a round shape with a bright colored pattern,

select this check box.

 < Bottom Right set> check box

If the lower right corner of the part is a round shape with a bright colored pattern,

select this check box.

 <Use Corner Check> check box

When using the <Use Corner Check> corner check algorithm, select this check

box.

 <Corner Check Algorithm> check box

Select the vision algorithm to be used to perform the corner check.

7-58

Next Generation, Multi-Functional Placer DECAN S1 Administrator’s Guide

 Fine

The boundary of the corner is recognized precisely. It is recommended that

this method be selected.

 Rough

The value for the boundary of the corner is not checked. It is not

recommended that this method be selected.

 <Score> edit box

Enabled when the <Use Corner Check> is selected.

"Score” is the numerical value that indicates how accurately the recognized part

shape matches with the vision algorithm data selected from the <Corner Check

Algorithm> combo box when recognizing the part shape. This "Score” has a value

between 0 and 1000 points.

 <Gap X/Y, Corner X/Y> edit box

The corner of the area to be recognized as X / Y direction size.

 <Use flip check> Check box

Checks for part flip-over. For more details, please refer to "7.1.2.4. TR component

data setting". for more information.

7-59

Part Registration

7.1.3. IC component data setting

7.1.3.1. SOP/ SOJ/ SOP2/ SOJ2 component data setting

Set the align data for SOP/ SOJ/ SOP2/ SOJ2 components.

Figure7.18 “Package Group =SOP” dialog box

Figure7.19 “Package Group =SOJ” dialog box