DECAN_S1_Administrator′s_Guide(Eng_Ver1.5)_Print.pdf - 第575页

17-11 Utility  <Close> button Closes the dialog box.

17-10

Next Generation, Multi-Functional Placer DECAN S1 Administrator’s Guide

17.5. Bypass [F8]

The following dialog box is displayed and shows it is in the PCB Bypass status.

If the head is above the conveyor, the PCB sensing sensor gets affected. Therefore, move

the head out of the conveyor and execute the command.

Figure17.7 “By-pass Operation” dialog box

 <PCB Size X> edit box

Displays the X direction size of the board set in <PCB Edit> - <Board>.

 <Inline status> group

Indicates the SMEMA related input status. (Lighted On: On, Lighted Off: Off)

Previous

Indicates the status of the previous machine.

Next

Indicates the status of the next machine.

Machine Busy

PCB not transferred.

Board is Available

PCB can be transferred.

 <Start> button

Starts the ‘PCB bypass’.

 <Stop> button

Stops the ‘PCB bypass’.

17-11

Utility

 <Close> button

Closes the dialog box.

17-12

Next Generation, Multi-Functional Placer DECAN S1 Administrator’s Guide

17.6. WarmUp [F9]

The <WarmUp> command is used to warm up each axis after power supply. When this

command is selected, the following dialog box is displayed.

Figure17.8 “Warm-Up” dialog box

Figure17.9 “Warm-Up” dialog box, After pressing the Start Button

 <Start> button

Starts the warm up operation. When this button is clicked on, starts the warm-up

operation and the elapsed time is displayed in the “Warm-up” dialog box.

 <Stop> button

When this button is clicked on, stops the <Warm-up>.