00195722-0102_UM_X-Serie_SR605_EN.pdf - 第103页

User Manual SIPLACE X-Series 3 Technical data for the machine From software version SR.605.xx 07/2008 EN Edition 3.1 Performance data 103 3 T echnical dat a for the machine 3.1 Performance dat a 3 3 3 3 T ypes of pla cem…

100%1 / 494
2 Operational safety User Manual SIPLACE X-Series
2.11 ESD guidelines From software version SR.605.xx 07/2008 EN Edition
102
Always place the modules on a conductive surface (table with an ESD coating, conductive ESD
foam, ESD bag or container).
Do not bring modules near visual display units, monitors or televisions. Keep them at least 10 cm
away from the screen.
2.11.4 Measurements and modifications to ESD modules
Do not take measurements on the modules unless the following conditions are fulfilled:
– the measuring device is earthed (e.g. via PE conductors) or
– you discharge the measuring head just before taking measurements with a potential-free
measuring device (e.g. by touching an unpainted metal part of the controller casing).
→ Always use an earthed soldering iron if you carry out any soldering work.
2.11.5 Dispatching ESD modules
→ Always store modules and components in conductive packaging (e.g. metallized plastic bags
or metal sleeves) and dispatch them in conductive packaging.
If the packaging is not conductive, place the modules in a conductive envelope before pack-
aging. Use conductive expanded rubber, ESD bags, domestic aluminum foil or paper, for ex-
ample. NEVER use plastic bags or film. 2
→ If the module has integral batteries, ensure that the conductive packaging does not touch or
short-circuit the battery terminals and, if necessary, first cover the terminals with insulating
tape or material.
User Manual SIPLACE X-Series 3 Technical data for the machine
From software version SR.605.xx 07/2008 EN Edition 3.1 Performance data
103
3 Technical data for the machine
3.1 Performance data
3
3
3
3
Types of placement
head
20-segment Collect&Place head (C&P20A)
12-segment Collect&Place head (C&P12)
6-segment Collect&Place head (C&P6)
SIPLACE TwinHead (TH)
PLEASE NOTE IPC value (comp./h)
According to the vendor-neutral conditions of the IPC 9850 standard published
by the Association of Connecting Electronics Industries.
SIPLACE Benchmark value (comp./h)
The SIPLACE benchmark value is measured during the machine acceptance
tests. It corresponds to the conditions set out in the SIPLACE scope of service
and supply.
Theoretical maximum output value (comp./h)
The theoretical maximum output value is calculated from the most favorable con-
ditions for each machine type and setting, and corresponds to the theoretical
conditions normally used in the industry.
SIPLACE X4 placement system
Number of gantries 4
Placement area 1 Placement area 2 IPC value Benchmark value Theoretical value
C&P20 / C&P20 C&P20 / C&P20 81,000 90,000 124,000
C&P20 / C&P20 C&P12 / C&P12 65,000 71,400 102,500
C&P20 / C&P20 C&P12 / C&P6 60,300 65,300 94,000
C&P20 / C&P20 C&P12 / TH 57,500 63,800 89,000
C&P20 / C&P20 C&P6 / C&P6 56,900 63,300 85,000
C&P20 / C&P20 C&P6 / TH 53,100 59,400 80,000
C&P20 / C&P20 TH / TH 47,800 52,500 75,000
C&P12 / C&P12 C&P12 / C&P12 49,000 52,800 81,500
C&P12 / C&P12 C&P12 / C&P6 44,300 46,700 72,500
C&P12 / C&P12 C&P12 / TH 41,500 45,200 67,500
C&P12 / C&P12 C&P6 / C&P6 40,900 44,700 64,000
C&P12 / C&P12 C&P6 / TH 37,100 40,800 59,000
C&P12 / C&P12 TH / TH 31,800 33,900 53,500
C&P12 / C&P6 C&P12 / C&P6 39,600 40,600 64,000
C&P12 / C&P6 C&P12 / TH 36,800 39,100 59,000
C&P12 / C&P6 C&P6 / C&P6 36,200 38,600 55,000
C&P12 / C&P6 C&P6 / TH 32,400 34,700 50,000
C&P12 / C&P6 TH / TH 27,100 27,800 45,000
C&P12 / TH C&P12 / TH 34,000 37,600 53,500
3 Technical data for the machine User Manual SIPLACE X-Series
3.1 Performance data From software version SR.605.xx 07/2008 EN Edition
104
3
C&P12 / TH C&P6 / TH 29,600 33,200 45,000
C&P12 / TH TH / TH 24,300 26,300 40,000
C&P6 / C&P6 C&P6 / C&P6 32,800 36,600 46,000
C&P6 / C&P6 C&P6 / TH 29,000 32,700 41,000
C&P6 / C&P6 TH / TH 23,700 25,800 36,000
C&P6 / TH C&P6 / TH 25,200 28,800 36,000
C&P6 / TH TH / TH 19,900 21,900 31,000
TH / TH TH / TH 14,600 15,000 26,000
SIPLACE X3 placement system
For the placement head configuration and the placement rate see the note on page 103
.
Number of gantries 3
Placement area 1 Placement area 2 IPC value Benchmark value Theoretical value
C&P20 / C&P20 C&P20 62,200 69,500 93,000
C&P20 / C&P20 C&P12 53,600 59,000 82,500
C&P20 / C&P20 C&P6 49,200 54,800 73,500
C&P20 / C&P20 TH 44,800 50,000 68,500
C&P12 / C&P12 C&P12 37,600 40,400 61,000
C&P12 / C&P12 C&P6 33,200 36,200 52,500
C&P12 / C&P12 TH 28,800 31,400 47,000
C&P12 / C&P6 C&P6 28,500 30,100 43,500
C&P12 / C&P6 TH 24,100 25,300 38,500
C&P12 / TH TH 21,300 23,800 33,500
C&P6 / C&P6 C&P6 25,100 28,100 34,500
C&P6 / C&P6 TH 20,700 23,300 29,500
C&P6 / TH TH 16,900 19,400 24,500
TH / TH TH 11,600 12,500 19,500
SIPLACE X2 placement system
For the placement head configuration and the placement rate see the note on page 103
.
Number of gantries 2
Placement area 1 Placement area 2 IPC value Benchmark value Theoretical value
C&P20 C&P20 43,400 49,000 62,000
C&P20 C&P12 34,800 38,500 51,000
C&P20 C&P6 30,400 34,300 42,500
C&P20 TH 26,000 29,500 37,500
C&P12 C&P12 26,200 28,000 40,500
C&P12 C&P6 21,800 23,800 32,000
C&P12 TH 17,400 19,000 26,500
C&P6 C&P6 17,400 19,600 23,000
C&P6 TH 13,000 14,800 18,000
TH TH 8,600 10,000 13,000