00195722-0102_UM_X-Serie_SR605_EN.pdf - 第446页

6 Station extensions User Manual SIPLACE X-Series 6.14 Feeder module cover flap (S feeder module) From software version SR.605.xx 07/2008 EN Edition 446 6.14 Feeder module cover flap (S feeder module) Item no. 001 19610-…

User Manual SIPLACE X-Series 6 Station extensions

From software version SR.605.xx 07/2008 EN Edition 6.13 Magnetic pin support

445

6.13 Magnetic pin support

Item no. 00119680-xx Magnetic pin support HS/HF/X/D-series

Wide boards tend to deflect during placement such that, under certain circumstances, the compo-

nents can no longer be placed with the desired accuracy. Highly curved PCBs also affect the

placement accuracy. This problem can be easily rectified by fitting magnetic pin supports on the

lifting table.

Fig. 6.13 - 1 Magnetic pin support

6 Station extensions User Manual SIPLACE X-Series

6.14 Feeder module cover flap (S feeder module) From software version SR.605.xx 07/2008 EN Edition

446

6.14 Feeder module cover flap (S feeder module)

Item no. 00119610-xx Feeder module cover flap HF/X/D3 for locations 2 or 4

Item no. 00119633-xx Feeder module cover flap HF/X/D3 for locations 1 or 3

The feeder module cover flap is installed over the component feeder area. It is designed to prevent

a head crash with an upright feeder module retainer that has not been engaged correctly. The

feeder module cover flap can also prevent the front panel of feeder modules entering the place-

ment head traveling range due to incorrect operation.

Fig. 6.14 - 1 Feeder module cover flap for locations 1 and 3

(1) Feeder module cover flap

(2) Mechanical lock

(3) Switch in the EMERGENCY STOP circuit

The switch for the feeder module cover flap is looped into the EMERGENCY STOP circuit. The

feeder module cover flap must be locked mechanically, which causes the switch to close the open

EMERGENCY STOP circuit.

User Manual SIPLACE X-Series 6 Station extensions

From software version SR.605.xx 07/2008 EN Edition 6.15 Component sensor for the C&P12 head

447

6.15 Component sensor for the C&P12 head

Item no. 00118021-xx Component sensor for the 12-segment C&P head

Fig. 6.15 - 1 12-segment Collect&Place head with component sensor

(1) 12-segment Collect&Place head

(2) Component sensor