00195722-0102_UM_X-Serie_SR605_EN.pdf - 第456页
6 Station extensions User Manual SIPLACE X-Series 6.18 Coplanarity laser module From software version SR.605.xx 07/2008 EN Edition 456 Red Outside the me asuring range, with lo w ref lection LED Off Laser switched off LE…
User Manual SIPLACE X-Series 6 Station extensions
From software version SR.605.xx 07/2008 EN Edition 6.18 Coplanarity laser module
455
6.18.6 LED displays on the controller
6
Fig. 6.18 - 4 Coplanarity laser module
(1) Laser sensor
(2) Detector
(3) Laser emitter
(4) Assembly bracket
(5) Controller
(6) LED displays and connections on the controller
The statuses of the coplanarity module are indicated by LEDs. The LEDs can be found at the bot-
tom of the controller (see item 6 in Fig. 6.18 - 4
, page 455).
LED state Status display
Green Test object in measuring range
Yellow Middle of measuring range
6 Station extensions User Manual SIPLACE X-Series
6.18 Coplanarity laser module From software version SR.605.xx 07/2008 EN Edition
456
Red
Outside the measuring range,
with low reflection
LED Off Laser switched off
LED Power Status display
LED lights up Supply voltage present
LED avg avg1 avg2
Off Off No averaging
Red Off Averaging 1
Off Red Averaging 2
Red Red Averaging 3
LED state Status display
User Manual SIPLACE X-Series 6 Station extensions
From software version SR.605.xx 07/2008 EN Edition 6.19 3D coplanarity laser module
457
6.19 3D coplanarity laser module
Item no. 00119919-xx 3D coplanarity sensor
6.19.1 Safety instructions
The safety instructions are the same as described for the 2D coplanarity laser module in Section
6.18
, page 451.
6.19.2 Description
The 3D coplanarity laser module no longer works with a dot-shaped laser light source. It now re-
quires a laser light line. The measuring process is based on the principle of triangulation (see Fig.
6.18 - 2
, page 452). This makes it possible to generate and analyze a height profile for a two-di-
mensional arrangement of component connections, e.g. BGA, QFP, et. The analysis returns re-
sults for the coplanarity (placement plane) and colinearity (placement line) of component leads or
balls. The 3D coplanarity laser module can be installed on SIPLACE X2 and X3 placement ma-
chines.
6
Fig. 6.19 - 1 3D coplanarity laser module