00195722-0102_UM_X-Serie_SR605_EN.pdf - 第58页

2 Operational safety User Manual SIPLACE X-Series 2.2 Warning labels From software version SR.605.xx 07/200 8 EN Edition 58 2.2.5 W arning labels on the PCB conveyor 2 Pos. W208 "Laser class 2" on the PCB conve…

100%1 / 494
User Manual SIPLACE X-Series 2 Operational safety
From software version SR.605.xx 07/2008 EN Edition 2.2 Warning labels
57
2.2.4.5 Warning label W207 on the inrush current limitation for the main power supply
2
Fig. 2.2 - 13 Warning label W207 on the inrush current limitation for the main power supply
Pos. W207, item no. 03009346-01
PCB1 Board, inrush current limiter - transformer
PCB2 Board, inrush current limiter - servo unit
PCB2
PCB1
2 Operational safety User Manual SIPLACE X-Series
2.2 Warning labels From software version SR.605.xx 07/2008 EN Edition
58
2.2.5 Warning labels on the PCB conveyor
2
Pos. W208 "Laser class 2" on the PCB conveyor in Fig. 2.2 - 14, page 58, item no. 03009347-01
(number per machine: 4 for the dual conveyor, 2 for the single conveyor)
2
2
2
Fig. 2.2 - 14 Warning label W208 "Laser class 2" on the PCB conveyor
Pos. W208, item no. 03009347-01
2
2
LASER RADIATION!
Do not look into beam
Laser class 2
User Manual SIPLACE X-Series 2 Operational safety
From software version SR.605.xx 07/2008 EN Edition 2.2 Warning labels
59
2.2.6 Warning label on the CEKON plug
2
Pos. W 211 in Fig. 2.2 - 15, page 59 (number per machine: 1)
2
Fig. 2.2 - 15 Warning label W211 on the CEKON plug
Pos. W211, item no. 03009351-01
2
RESIDUAL VOLTAGE!
Wait 30 seconds after disconnecting the main power plug from the mains to
allow any residual voltages to dissipate.
NAFTA region: Hazardous Voltage
Residual power at plug prongs and wire ends will cause death or serious in-
jury. Avoid contact with power plug and/or wire ends for 30 seconds