00195722-0102_UM_X-Serie_SR605_EN.pdf - 第398页
6 Station extensions User Manual SIPLACE X-Series 6.1 Nozzle changer From software version SR.605.xx 07/2008 EN Edition 398 6.1.4.3 Position of the nozzle changers for t he T winHead on the X4 machine A nozzle changer ma…
User Manual SIPLACE X-Series 6 Station extensions
From software version SR.605.xx 07/2008 EN Edition 6.1 Nozzle changer
397
6.1.4 Nozzle changer for the SIPLACE TwinHead
Item no. 03005191-xx Magazine for 2 nozzles
Item no. 03001807-xx Magazine for 1 nozzle
6
Fig. 6.1 - 25 Nozzle changers for the SIPLACE TwinHead
6.1.4.1 Description
This nozzle changer can hold up to 12 nozzle magazines. There are two types of magazine avail-
able: standard magazines and magazines for special nozzles or grippers. The magazines are
seated on a common support. They are centered with two parallel pins and fixed in place with two
countersunk screws.
6.1.4.2 Technical data
6
6
Nozzle changers for the SIPLACE TwinHead
Dimensions (length x width x height) 448 x 68 x 49 mm³
Number of nozzle holders 16 for standard nozzles
4 for special nozzles or grippers
Nozzle types 5xx, standard
4 xx with adapter
9 xx with adapter
Nozzle changeover time Approx. 2 s per nozzle
6 Station extensions User Manual SIPLACE X-Series
6.1 Nozzle changer From software version SR.605.xx 07/2008 EN Edition
398
6.1.4.3 Position of the nozzle changers for the TwinHead on the X4 machine
A nozzle changer may be installed for each TwinHead at locations 1 to 4.
– Nozzle changer 1 at locations 1 and 3 (item 1 in Fig. 6.1 - 26
): 12 magazines each
– Nozzle changer 2 at locations 2 and 4 (item 5 in Fig. 6.1 - 26
): 10 magazines each
This gives a total capacity of 4 nozzle changers with 44 magazines and a total of 88 nozzle hold-
ers.
6
Fig. 6.1 - 26 Position of the nozzle changers for the TwinHead on the X4 machine
PLEASE NOTE 6
If there is an MTC installed at location 2 or 4, then the "Nozzle changer for the TwinHead in the
placement area with 2 gantries and docked MTC" option must be set up there (see Section
6.1.4.7, from page 402).
User Manual SIPLACE X-Series 6 Station extensions
From software version SR.605.xx 07/2008 EN Edition 6.1 Nozzle changer
399
6.1.4.4 Position of the nozzle changers for the TwinHead on the X3 machine
A nozzle changer may be installed for the TwinHead at locations 1 to 4.
Nozzle changer 1 at locations 1 and 3 (item 1 in Fig. 6.1 - 27
): 12 magazines each
Nozzle changer 2 at locations 2 and 4 (item 5 in Fig. 6.1 - 27
): 10 magazines
This gives a total capacity of 4 nozzle changers with 44 magazines and a total of 88 nozzle hold-
ers.
6
Fig. 6.1 - 27 Position of the nozzle changers for the TwinHead on the X3 machine
(1) Nozzle changer 1
(2) Standard magazine
(3) Magazine for special nozzles or grippers
(4) Component reject bin
(5) Nozzle changer 2
PLEASE NOTE 6
If there is an MTC installed at location 4, then the "Nozzle changer for the TwinHead in the place-
ment area with 2 gantries and docked MTC" option must be set up there (see Section 6.1.4.7,
from page 402).