00195722-0102_UM_X-Serie_SR605_EN.pdf - 第371页
User Manual SIPLACE X-Series 6 Station extensions From software version SR.605.xx 07/2008 EN Edition 6.1 Nozzle changer 371 6.1.1.3 Position of the nozzle changers for the C&P20A head on the X4 machine 1 or 2 nozzle …
6 Station extensions User Manual SIPLACE X-Series
6.1 Nozzle changer From software version SR.605.xx 07/2008 EN Edition
370
6.1.1.1 Description
This nozzle changer can hold up to 6 magazines, each with 12 nozzle holders. The magazines
are seated on a common support. They are centered using two parallel pins and fixed in place with
4 snap fasteners. Microswitches monitor whether the magazines are seated correctly on the body
of the nozzle changer in order to prevent the placement head colliding with a protruding magazine.
All magazine locations must be filled since the safety circuit stops the machine in response to
missing magazines or magazines that are not seated correctly.
6.1.1.2 Technical data
6
Nozzle changer for the 20-segment Collect&Place head
Dimensions (length x width x height) 449 x 94.5 x 79 mm³
Number of nozzle holders 72
Nozzle types 10xx, 11xx and 12xx
Nozzle changeover time approx. 2s per nozzle
Compressed air connection 0.48 MPa (4.8 bar)
User Manual SIPLACE X-Series 6 Station extensions
From software version SR.605.xx 07/2008 EN Edition 6.1 Nozzle changer
371
6.1.1.3 Position of the nozzle changers for the C&P20A head on the X4 machine
1 or 2 nozzle changers may be installed at locations 1, 2, 3, and 4 for the 20-segment Col-
lect&Place head (items 1 and 2 in Fig. 6.1 - 2
). This gives a total capacity of 8 nozzle changers
with 48 magazines and a total of 576 nozzle holders.
6
Fig. 6.1 - 2 Position of the nozzle changer for the 20-segment Collect&Place head on the X4 machine
(1) Nozzle changer, "row 1"
(2) Nozzle changer, "row 2"
(3) Reject bin for components
(4) Take-off device and reject bin for nozzles
(5) Nozzle magazine
6 Station extensions User Manual SIPLACE X-Series
6.1 Nozzle changer From software version SR.605.xx 07/2008 EN Edition
372
6.1.1.4 Position of the nozzle changers for the C&P20A head on the X3 machine
1 or 2 nozzle changers may be installed at locations 1, 3, and 4 for the 20-segment Collect&Place
head (items 1 and 2 in Fig. 6.1 - 3
). One nozzle changer may be installed at location 2. This gives
a total capacity of 7 nozzle changers with 42 magazines and a total of 504 nozzle holders.
6
Fig. 6.1 - 3 Position of the nozzle changer for the 20-segment Collect&Place head on the X3 machine
6
(1) Nozzle changer, "row 1"
(2) Nozzle changer, "row 2"
(3) Reject bin for components
(4) Take-off device and reject bin for nozzles
(5) Nozzle magazine