00195722-0102_UM_X-Serie_SR605_EN.pdf - 第369页
User Manual SIPLACE X-Series 6 Station extensions From software version SR.605.xx 07/2008 EN Edition 6.1 Nozzle changer 369 6 S t ation extensions 6.1 Nozzle changer Nozzle changers can greatly increase the flexibility o…
5 Tasks for the operating personnel User Manual SIPLACE X-Series
5.12 Docking the component trolley in or out at the docking station From software version SR.605.xx 07/2008 EN Edition
368
User Manual SIPLACE X-Series 6 Station extensions
From software version SR.605.xx 07/2008 EN Edition 6.1 Nozzle changer
369
6 Station extensions
6.1 Nozzle changer
Nozzle changers can greatly increase the flexibility of the placement heads for processing differ-
ent types of component. If the placement program requires a nozzle change, then the placement
head automatically returns the old nozzle to the nozzle holder and picks up the new nozzle. Noz-
zles that were separated out during the vacuum check can also be quickly changed.
It is significantly more exact and faster to pick up nozzles from a nozzle changer than would be
possible manually. When placing small components, it is essential to minimize the radial eccen-
tricity during nozzle rotation.
6.1.1 Nozzle changer for the 20-segment Collect&Place head
Item no. 00119715-xx Nozzle changer, X-series, C&P20A
6
Fig. 6.1 - 1 Nozzle changer for the 20-segment Collect&Place head
6 Station extensions User Manual SIPLACE X-Series
6.1 Nozzle changer From software version SR.605.xx 07/2008 EN Edition
370
6.1.1.1 Description
This nozzle changer can hold up to 6 magazines, each with 12 nozzle holders. The magazines
are seated on a common support. They are centered using two parallel pins and fixed in place with
4 snap fasteners. Microswitches monitor whether the magazines are seated correctly on the body
of the nozzle changer in order to prevent the placement head colliding with a protruding magazine.
All magazine locations must be filled since the safety circuit stops the machine in response to
missing magazines or magazines that are not seated correctly.
6.1.1.2 Technical data
6
Nozzle changer for the 20-segment Collect&Place head
Dimensions (length x width x height) 449 x 94.5 x 79 mm³
Number of nozzle holders 72
Nozzle types 10xx, 11xx and 12xx
Nozzle changeover time approx. 2s per nozzle
Compressed air connection 0.48 MPa (4.8 bar)