00195722-0102_UM_X-Serie_SR605_EN.pdf - 第222页
3 Technical data for the machine User Manual SIPLACE X-Series 3.11 SIPLACE X-series component trolley From software version SR.605.xx 07/2008 EN Edition 222 3.1 1.8 T ape cont ainer , SIPLACE X-series 3.1 1.8.1 Descripti…
User Manual SIPLACE X-Series 3 Technical data for the machine
From software version SR.605.xx 07/2008 EN Edition 3.11 SIPLACE X-series component trolley
221
3.11.7 Support for an additional tape reel (X-series)
3
Fig. 3.11 - 8 Support for an additional tape reel (X-series)
(1) Support for an additional tape reel, item no. 00141217-xx
(2) Mounting device for the support
X-series feeder modules can process component tapes without problems if the lateral offset be-
tween the feeder module and the tape reel does not exceed 60 mm. If a predefined set-up means
that the maximum permitted offset cannot be maintained, we recommend that you use the mount
for an additional tape reel (item 1). Simply insert the mount into the holder (item 2) and push it until
the offset is less than the maximum permitted value of 60 mm. The component trolley has 5 hold-
ers in total. Each tape reel mount can hold 2 tape reels, which means that up to ten 15" (381 mm)
reels can be positioned above the tape container.
max. 60 mm
3 Technical data for the machine User Manual SIPLACE X-Series
3.11 SIPLACE X-series component trolley From software version SR.605.xx 07/2008 EN Edition
222
3.11.8 Tape container, SIPLACE X-series
3.11.8.1 Description
The tape container can hold reels up to 19" (483 mm) in diameter. The insertion of separating
plates is described in Section 5.5.6
on page 336.
3
Fig. 3.11 - 9 Component trolley, SIPLACE X-series, with tape container
(1) Component trolley
(2) Position of the spindles
(3) Waste tape container
(4) Tape container
(5) Separating plate
(6) Spindle (enlarged)
User Manual SIPLACE X-Series 3 Technical data for the machine
From software version SR.605.xx 07/2008 EN Edition 3.11 SIPLACE X-series component trolley
223
3.11.8.2 Maximum tape reel diameter in relation to the PCB conveyor height
3
PLEASE NOTE: 3
X-series component trolleys do not generally need spindles. However, if the "Timeout" error mes-
sage occurs increasingly on the X feeder module, we recommend that you do use spindles.
3.11.9 Waste tape chute, SIPLACE X-series
3
Fig. 3.11 - 10 Used tape chute for the component trolley docking unit from the SIPLACE X-series
Depending on the PCB conveyor height, the length of the waste tape chute can be set so that the
pieces of tape are diverted directly into the waste tape container of the component trolley.
PLEASE NOTE 3
The used tape chute for the X-series can only be installed on the component trolley docking unit
for the X-series (see Fig. 5.11 - 3, page 360).
Without mount for the
additional tape reel
With mount for the
additional tape reel
PCB conveyor
height
of the CO trolley
Tape reel diameter Tape reel diameter
without spindle with spindle
830 mm 17" 15" < 15"
900 mm 19" 17" 15"
930 mm 19" 19" 17"
950 mm 19" 19" 19"