00195722-0102_UM_X-Serie_SR605_EN.pdf - 第331页

User Manual SIPLACE X-Series 5 Tasks for the operating personnel From software version SR.605.xx 07/2008 EN Edition 5.4 Changing shift 331 5.4.2 Safety instructions for em ptying the waste tape cont ainer 5 Fig. 5.4 - 1 …

5 Tasks for the operating personnel User Manual SIPLACE X-Series

5.4 Changing shift From software version SR.605.xx 07/2008 EN Edition

330

5.4 Changing shift

PLEASE NOTE: 5

You will find additional information in the following manuals or data media:

– Getting Started with Station Software 605.xx

– SIPLACE X-series preventive maintenance manual

– Parts catalog on the product CD

5.4.1 Activities at shift change

→ Splice the tapes early. The feeder modules do not have to be refilled as soon as the new shift

starts. This minimizes extended down times.

→ At the shift change, pass important information on to the next operator. This includes, for in-

stance, changes to the placement program. Also read through the list of the descriptions of

the steps to take in Section 5.8

, page 354.

→ Carry out a set-up check.

Make sure that the feeder modules are equipped with the correct components, that they are

at the correct locations in the component trolley and that the conveyor increment is set cor-

rectly.

→ Hand over the line in the same state that you would want to find it in when starting your shift.

This means that:

– The rejection containers are empty.

– The waste tape containers are empty. Follow the safety instructions given in Section

5.4.2

, page 331.

– The feeder areas have been carefully cleaned with a vacuum cleaner.

User Manual SIPLACE X-Series 5 Tasks for the operating personnel

From software version SR.605.xx 07/2008 EN Edition 5.4 Changing shift

331

5.4.2 Safety instructions for emptying the waste tape container

Fig. 5.4 - 1 Safety instructions for emptying the waste tape container

The waste tape container must be pulled out of the component trolley for emptying. There is a risk

of catching your thumbs as you do so.

→ To avoid this risk, hold the waste tape container with your fingers on the underside of the han-

dle and place your thumb on the handle.

→ Do NOT put your thumbs in the gap between the tape container and waste tape container as

you could catch your thumbs if you do.

5 Tasks for the operating personnel User Manual SIPLACE X-Series

5.5 Carrying out a walk-through inspection From software version SR.605.xx 07/2008 EN Edition

332

5.5 Carrying out a walk-through inspection

5.5.1 Checking the X feeder modules

Fig. 5.5 - 1 Checking the X feeder modules

(1) Flap

(2) Blade

(3) Status display

(4) LCD display

→ Check to see whether the tape foil removal container for the X tape feeder module is full.

Open the flap (item 1). Pull out the cover foil and cut it with scissors or on the integral blade

(item 2) on 8 and 12 mm X tape feeder modules.