00195722-0102_UM_X-Serie_SR605_EN.pdf - 第281页

User Manual SIPLACE X-Series 4 Setting up and commissioning From software version SR.605.xx 07/2008 EN Edition 4.3 Setting up the placement machine 281 → Remove the cable covers (items 3 and 5 in Fig. 4.3 - 14 , page 280…

100%1 / 494
4 Setting up and commissioning User Manual SIPLACE X-Series
4.3 Setting up the placement machine From software version SR.605.xx 07/2008 EN Edition
280
4.3.9 Fitting the input conveyor
4.3.9.1 Tools
– Allen keys, DIN 911, set
– Phillips screwdriver, size 1
4.3.9.2 Assembly
4
Fig. 4.3 - 14 Input conveyor - dual conveyor
(1) Rail, input conveyor
(2) rail, processing conveyor 1
(3) Cable cover 20 x 200
(4) Countersunk screw, ISO 7046, M3x6, 2x per cable cover
(5) Cable cover 20 x 310
(6) Fillister head screw DIN 912, M3x5, 1x per cable cover
(7) Fillister head screw DIN 912, M6x16, and washer, 4x per rail
(8) Guide for hexagonal shaft
(9) Hexagonal shaft (single conveyor: one, dual conveyor: two)
(10) drive unit
User Manual SIPLACE X-Series 4 Setting up and commissioning
From software version SR.605.xx 07/2008 EN Edition 4.3 Setting up the placement machine
281
→ Remove the cable covers (items 3 and 5 in Fig. 4.3 - 14, page 280) from the input conveyor
(item 1 in Fig. 4.3 - 14
, page 280).
→ Carefully place the rail (item 1 in Fig. 4.3 - 14
, page 280) against the rail on the processing
conveyor (item 2 in Fig. 4.3 - 14
, page 280).
CAUTION 4
Be careful not to cut through any of the light barrier or drive motor cables.
→ Fix each rail using 4 fillister head screws M6x16 and the associated washers (item 7 in Fig.
4.3 - 14
, page 280).
→ Connect the power cable to the light barriers and drive motors.
→ Fix the cable covers in place (item 3 and 5 in Fig. 4.3 - 14
, page 280).
→ Introduce the hexagonal shaft (item 9 in Fig. 4.3 - 14
, page 280) into the drive unit (item 10 in
Fig. 4.3 - 14
, page 280).
→ Make sure that the hexagonal shaft guide (item 8 in Fig. 4.3 - 14
, page 280) always points
towards the conveyor side wall to which the drive unit (item 10 in Fig. 4.3 - 14
, page 280) is
fixed.
4 Setting up and commissioning User Manual SIPLACE X-Series
4.3 Setting up the placement machine From software version SR.605.xx 07/2008 EN Edition
282
4.3.10 Fitting the extension kit on the PCB input side
4.3.10.1 Tools
– Allen keys, DIN 911, set
– Machine key
4.3.10.2 Assembly
4
Fig. 4.3 - 15 Fitting the extension kit on the PCB input side
(1) Extension kit
(2) Door
(3) Fillister head screw DIN 912, M6x16 and washer
(4) Ground connection point
(5) Conveyor cover
(6) Side panel, detached
(7) Drawer unit rail
(8) Box PC unit (see Section 4.3.11
, page 287)
(9) Axis unit (X3, X4: gantries 1 and 4)