00195722-0102_UM_X-Serie_SR605_EN.pdf - 第368页

5 Tasks for the operating personnel User Manual SIPLACE X-Series 5.12 Docking the component trolley in or out at the docking station From software version SR.605.xx 07/2008 EN Edition 368

User Manual SIPLACE X-Series 5 Tasks for the operating personnel

From software version SR.605.xx 07/2008 EN Edition 5.12 Docking the component trolley in or out at the docking station

367

→ Push the component trolley carefully into the docking station. This will raise the component

table.

→ Make sure that the component trolley is standing fully on the base plate of the docking station.

→ Apply the two horizontal tensioners at the same time (item 3 in Fig. 5.12 - 1

, page 366).

The component table is raised into its definitive position and locked.

→ Use the button (item 2 in Fig. 5.12 - 1

, page 366) to lock or release all the feeder modules on

the component table.

5.12.2 Docking out the SIPLACE X-series component trolley from the docking sta-

tion

WARNING 5

→ While undocking, do not reach into the areas between component trolley and docking station.

→ Release the two horizontal tensioners at the same time (item 3 in Fig. 5.12 - 1

, page 366).

The component table is lowered.

→ Now pull the component trolley out of the docking station.

5 Tasks for the operating personnel User Manual SIPLACE X-Series

5.12 Docking the component trolley in or out at the docking station From software version SR.605.xx 07/2008 EN Edition

368

User Manual SIPLACE X-Series 6 Station extensions

From software version SR.605.xx 07/2008 EN Edition 6.1 Nozzle changer

369

6 Station extensions

6.1 Nozzle changer

Nozzle changers can greatly increase the flexibility of the placement heads for processing differ-

ent types of component. If the placement program requires a nozzle change, then the placement

head automatically returns the old nozzle to the nozzle holder and picks up the new nozzle. Noz-

zles that were separated out during the vacuum check can also be quickly changed.

It is significantly more exact and faster to pick up nozzles from a nozzle changer than would be

possible manually. When placing small components, it is essential to minimize the radial eccen-

tricity during nozzle rotation.

6.1.1 Nozzle changer for the 20-segment Collect&Place head

Item no. 00119715-xx Nozzle changer, X-series, C&P20A

Fig. 6.1 - 1 Nozzle changer for the 20-segment Collect&Place head