00195722-0102_UM_X-Serie_SR605_EN.pdf - 第71页
User Manual SIPLACE X-Series 2 Operational safety From software version SR.605.xx 07/2008 EN Edition 2.5 Safety instructions for operating the machine 71 2.5.10 High temperatures at the C&P20A placement head d uring …
2 Operational safety User Manual SIPLACE X-Series
2.5 Safety instructions for operating the machine From software version SR.605.xx 07/2008 EN Edition
70
2.5.7 Note on the ESD safety of the placement machines
Only use nozzles that are identified as conductive. This is the only way to meet the requirements
for the ESD safety of the machine.
2.5.8 Safety instructions for emptying the waste tape container
The waste tape container must be pulled out of the component trolley for emptying. There is a risk
of catching your thumbs as you do so. Please observe the safety instructions given in Section
5.4.2
, page 331 to prevent this from happening.
2.5.9 Safety instructions for correct use of the reject bin
Observe the following instructions to avoid risk of collision between the placement head and com-
ponent or the nozzle reject bin:
→ Make sure, that the reject bin is seated correctly in its mount.
→ Check that the reject bin does not project over the mount.
PLEASE NOTE 2
For every reject bin, a sensor (see Section 6.5
, page 431) can be retrofitted which signalizes the
correct position of the reject bin.
User Manual SIPLACE X-Series 2 Operational safety
From software version SR.605.xx 07/2008 EN Edition 2.5 Safety instructions for operating the machine
71
2.5.10 High temperatures at the C&P20A placement head during continuous oper-
ation
2
Fig. 2.5 - 6 High temperatures at the C&P20A placement head during continuous operation
(1) Temperature information plate, item no. 03031926-01
(2) Housing for the star motor
(3) Handle
CAUTION
HIGH TEMPERATURES 2
The housing of the star motor and the handle on the placement head may become very hot dur-
ing continuous operation and in ambient temperature in excess of 22 °C. Be careful when touch-
ing the parts.
2 Operational safety User Manual SIPLACE X-Series
2.5 Safety instructions for operating the machine From software version SR.605.xx 07/2008 EN Edition
72
2.5.11 High temperatures on the X feeder modules during continuous operation
2
Fig. 2.5 - 7 High temperatures on the X feeder modules during continuous operation
(1) Temperature information plate, item no. 03031926-01
(2) Stepping motor
CAUTION
HIGH TEMPERATURES 2
The stepping motors can become very hot during continuous operation and in an ambient tem-
perature in excess of 22 °C. Be careful when touching the motors.