00195722-0102_UM_X-Serie_SR605_EN.pdf - 第444页
6 Station extensions User Manual SIPLACE X-Series 6.12 Long board From software version SR.605.xx 07/2008 EN Edition 444 6 6 We can su pply the Long board option as a retr ofit kit for placing PCBs that are over 450 mm l…
User Manual SIPLACE X-Series 6 Station extensions
From software version SR.605.xx 07/2008 EN Edition 6.10 Siemens interface
443
6.10 Siemens interface
Item no. 00116808-xx SIPLACE interface HF/X/D3
The conveyor interface on the placement machines from the X-series is configured to the SMEMA
standard. It is, however, still possible to use this interface in accordance with the Siemens stan-
dard. This is a significant benefit when an X-series machine is to be integrated into older SIPLACE
lines, in which case it would not be necessary to retrofit the older machines to conform to the
SMEMA standard.
Simply configure the conveyor interface of the X-series machines to the Siemens standard and
connect the machines using the associated interface cable.
More detailed information can be found in the Siemens conveyor interface retrofit instructions",
item no. 00194343-01.
6.11 Package for splice detection
Item no. 00119642-xx Splice detection, table controller HF/X/D3
Item no. 00116937-xx Splice detection, stations package HF/X/D3
Item no. 00141xxx-xx Splice sensors for S tape feeder modules
(see Section 3.10.7
, page 190 for item numbers)
Splice detection serves to recognize a batch change for components. The component tapes are
attached to the splicing point by a metal strip. The component tape runs over the splice sensor
which is installed on the feeder module and signalizes a tape change.
6
6.12 Long board
Item no. 00119672-xx Stopper, Long board option, SIPLACE HF/X/D3
Item no. 00119629-xx Conveyor widths 250/508 mm ("Wide board"), X-series/D3
The following PCB formats can be placed on X-series machines:
6
Single conveyor (standard width) 50 x 50 mm² to 450 x 460 mm²
Single conveyor: Wide board 50 x 50 mm² to 450 x 508 mm²
Dual conveyor (standard width) 50 x 50 mm² to 450 x 216 mm²
Dual conveyor: Wide board 50 x 50 mm² to 450 x 250 mm²
6 Station extensions User Manual SIPLACE X-Series
6.12 Long board From software version SR.605.xx 07/2008 EN Edition
444
6
6
We can supply the Long board option as a retrofit kit for placing PCBs that are over 450 mm long.
If the Long board option is installed, then the following PCB formats can be processed:
6
6
6
The retrofit kit consists of the following parts:
– Complete mechanism: stopper, sensors, cables and assembly parts
– Optional CD for enabling the function on the SIPLACE Pro computer
– Retrofit instructions
PLEASE NOTE 6
The Long board option must be ordered 2x for the dual conveyor.
More detailed information can be found in the Long board retrofit instructions,
item no. 00193888-01.
Dual conveyor in Single conveyor mode 50 x 50 mm² to 450 x 416 mm²
Dual conveyor in Single conveyor mode: Wide board 50 x 50 mm² to 450 x 450 mm²
Single conveyor: Long board (standard width) 50 x 80 mm² to 610 x 460 mm²
Single conveyor: Wide board, Long board 50 x 80 mm² to 610 x 508 mm²
Dual conveyor: Long board 50 x 80 mm² to 610 x 216 mm²
Dual conveyor: Wide board, Long board 50 x 80 mm² to 610 x 250 mm²
Dual conveyor in Single conveyor mode: Long board 50 x 80 mm² to 610 x 416 mm²
Dual conveyor in Single conveyor mode: Wide board, Long
board
50 x 80 mm² to 610 x 450 mm²
User Manual SIPLACE X-Series 6 Station extensions
From software version SR.605.xx 07/2008 EN Edition 6.13 Magnetic pin support
445
6.13 Magnetic pin support
Item no. 00119680-xx Magnetic pin support HS/HF/X/D-series
Wide boards tend to deflect during placement such that, under certain circumstances, the compo-
nents can no longer be placed with the desired accuracy. Highly curved PCBs also affect the
placement accuracy. This problem can be easily rectified by fitting magnetic pin supports on the
lifting table.
6
Fig. 6.13 - 1 Magnetic pin support