00195722-0102_UM_X-Serie_SR605_EN.pdf - 第460页
6 Station extensions User Manual SIPLACE X-Series 6.20 SIPLACE Productivity Lift From software version SR.605.xx 07/2008 EN Edition 460 6.20 SIPLACE Productivity Lif t Item no. 001 19314-xx Productivity Lift, underfloor …
User Manual SIPLACE X-Series 6 Station extensions
From software version SR.605.xx 07/2008 EN Edition 6.19 3D coplanarity laser module
459
– Only one coplanarity laser module may be installed on each machine. The 3D coplanarity la-
ser module can therefore not be operated together with the previous module (see Section
6.18
, page 451).
– The 3D coplanarity laser module can only be installed at location 3.
– The 3D coplanarity laser module can only be used in conjunction with the TwinHead.
– The 3D coplanarity laser module cannot be set up if there is a Collect&Place head installed
in this placement area.
6.19.6 Analysis computer
A box PC acts as an analysis computer. It is housed together with the control computer and the
machine controller on the input side.
6
Fig. 6.19 - 2 Box PC for the 3D coplanarity laser module
(1) Control computer
(2) Machine controller
(3) Analysis computer for the 3D coplanarity laser module
6 Station extensions User Manual SIPLACE X-Series
6.20 SIPLACE Productivity Lift From software version SR.605.xx 07/2008 EN Edition
460
6.20 SIPLACE Productivity Lift
Item no. 00119314-xx Productivity Lift, underfloor section of dual conveyor
Item no. 00116325-xx Productivity Lift, HV shuttle with dual conveyor, emergency belt
Item no. 00116310-xx Productivity Lift, HV shuttle with single conveyor, emergency belt
Item no. 00119316-xx Productivity Lift, underfloor section of single conveyor
Item no. 00116326-xx Productivity Lift, V shuttle with single conveyor, emergency belt
Item no. 00116316-xx Productivity Lift accessory package 1 (1 x per line if an open conveyor
belt is used without safety cover upstream or downstream of a SI-
PLACE Productivity Lift)
Item no. 00116317-xx Productivity Lift accessory package 2 (1 x per line if an open conveyor
belt is used with safety cover upstream or downstream of a SIPLACE
Productivity Lift)
Item no. 00119635-xx Productivity Lift accessory package for HF or X-series (for incorporat-
ing the placement machine into the safety circuit of the SIPLACE Pro-
ductivity Lift)
6.20.1 Concept of parallel placement
Placement lines are generally arranged in series and are linked to one another serially. The
placement program is processed sequentially while the PCBs are transported from one machine
to the next. This means that the placement of a PCB is distributed between various machines.
When machines are connected in parallel, the components to be placed by individual machines
are combined. Several machines work through the same placement program. They place all the
components on one machine that would be distributed between several machines with serial pro-
cessing. When one machine runs out of capacity, the PCBs are moved to and placed at the next
machine with the same placement program. This combination of machines with the same compo-
nents to be placed is known as a group or “cluster”.
6.20.2 Implementing parallel placement
Lines with machines arranged in parallel take up a lot more space, so the parallel placement con-
cept was implemented with an underfloor conveyor and horizontal / vertical lift (HV shuttle). The
machines are still arranged in series, but the lift units and underfloor conveyors allow the line to
be operated in parallel. In this way, SIPLACE lines remain almost as compact as before.
User Manual SIPLACE X-Series 6 Station extensions
From software version SR.605.xx 07/2008 EN Edition 6.20 SIPLACE Productivity Lift
461
6
Fig. 6.20 - 1 A comparison of serial and parallel lines
6.20.2.1 Underfloor conveyor
Two conveyor belts carry empty or placed PCBs underneath the machines (see Fig. 6.20 - 1). The
maximum component height is 17 mm.
6.20.2.2 Horizontal/vertical lift (horizontal/vertical shuttle)
There is an HV shuttle at the start of a line, between the machines and at the end of the line. It
carries the PCBs between the underfloor and processing levels, and between the two tracks on
the underfloor conveyors.
Serial line
Parallel line
Underfloor conveyor
Group (cluster)
Horizontal/
vertical lift