00195722-0102_UM_X-Serie_SR605_EN.pdf - 第387页

User Manual SIPLACE X-Series 6 Station extensions From software version SR.605.xx 07/2008 EN Edition 6.1 Nozzle changer 387 6.1.2.10 "Row 2" nozzle changer for the 12-segment Co llect&Place head Item no. 00…

100%1 / 494
6 Station extensions User Manual SIPLACE X-Series
6.1 Nozzle changer From software version SR.605.xx 07/2008 EN Edition
386
PLEASE NOTE
Make sure that you insert the magazine so that the centering pins slide into the centering hole
(item 3 in Fig. 6.1 - 14, page 385) and slot (item 4 in Fig. 6.1 - 14, page 385). 6
→ First place the side of the magazine with the numbered nozzles 1, 2, 3 and 4 on the base. The
retaining clamp (item 2 in Fig. 6.1 - 14
, page 385) must slide into the slot in the magazine.
→ Push the spring hook away from the magazine.
→ Press the magazine so that it lies flat on the base, then release the spring hook. The spring
hook must latch into place.
6.1.2.9 Position detection
Every magazine of the nozzle changer has a positioning fiducial for position detection.
6
Fig. 6.1 - 15 Nozzle changer - Position detection
(1) Positioning fiducial
(2) Position of the nozzles in the magazine with respect to the positioning fiducial
User Manual SIPLACE X-Series 6 Station extensions
From software version SR.605.xx 07/2008 EN Edition 6.1 Nozzle changer
387
6.1.2.10 "Row 2" nozzle changer for the 12-segment Collect&Place head
Item no. 00119663-xx Nozzle changer 2, HF/X/D3, 12-segment Collect&Place head
The "row 2" nozzle changer may be installed at the following locations:
X4 placement machine:Locations 1, 2, 3 and 4 (see Fig. 6.1 - 10
, page 380)
X3 placement machine:Locations 1, 3 and 4 (see Fig. 6.1 - 11
, page 381)
X2 placement machine:Locations 1 and 3 (see Fig. 6.1 - 12
, page 382)
The retrofit package contains an assembly kit and a nozzle take-off device with reject bin, in ad-
dition to the nozzle changer.
6
Fig. 6.1 - 16 Assembly kit for the "row 2" nozzle changer
(1) Assembly kit for the "row 2" nozzle changer
(2) Nozzle take-off device for type 8xx nozzles
(3) Nozzle take-off device for type 9xx nozzles
(4) Nozzle reject bin
6 Station extensions User Manual SIPLACE X-Series
6.1 Nozzle changer From software version SR.605.xx 07/2008 EN Edition
388
6.1.3 Nozzle changer for the 6-segment Collect&Place head
Item no. 00119662-xx Nozzle changer , HF/X/D3, 6-segment Collect&Place head
6
Fig. 6.1 - 17 Nozzle changer for the 6-segment Collect&Place head
6.1.3.1 Description
This nozzle changer can hold up to 6 magazines, each with 6 nozzle holders. There are two types
of magazine available: magazines for type 8xx nozzles and magazines for type 9xx nozzles. The
magazines are seated on a common support. They are centered using two parallel pins and fixed
in place with clips.
6.1.3.2 Technical data
6
Nozzle changer for the 6-nozzle Collect&Place head
Dimensions (length x width x height) 448 x 122.5 x 97.7 mm³
Number of nozzle holders 36
Nozzle types 8 xx, 9 xx
Nozzle changeover time approx. 2s per nozzle
Compressed air connection 0.48 MPa (4.8 bar)