Service Manual HS60.pdf - 第105页

HS -60 Se rvic e Manu al 4 Ga ntr ies 03/ 2003 US Is sue 4.6 Repl acing the e l a stome ric spri ng (0 0301 040- 01) 103 4.6 Repla cing the e last omeric spring (00 301040 -01) 4.6. 1 T ools and eq uipm ent – Set of DIN …

100%1 / 348
4 Gantries HS-60 Service Manual
4.5 Special safety instructions when working in the vicinity of powerful magnetic fields 03/2003 US Issue
102
4
Fig. 4.5 - 1 Position of the permanent magnets of the Y-axis linear drives
Key
1A, 1B, 1C, 1DPermanent magnets for the Y-axis linear drive for gantries 1 and 4 4
2A, 2B, 2C, 2DPermanent magnets for the Y-axis linear drive for gantries 2 and 3 4
T Transport direction 4
4
T
1D
1C
1A
2C
2B
2A
2D
1B
HS-60 Service Manual 4 Gantries
03/2003 US Issue 4.6 Replacing the elastomeric spring (00301040-01)
103
4.6 Replacing the elastomeric spring (00301040-01)
4.6.1 Tools and equipment
– Set of DIN 911 Allen keys
4.6.2 Parts
25x10.5x50 elastomeric spring, from item number 00301040-01 4
4.6.3 Removing the elastomeric spring
Æ
Switch the placement system off and secure it to prevent switching on again as described in
Section 4.4
, page 100 onward.
DANGER POWERFUL MAGNETIC FIELD 4
Always follow the special safety instructions when working in the vicinity of powerful magnetic
fields (see Section 4.5, page 101 onward). 4
Fig. 4.6 - 1 Replacing the elastomeric spring
Key
1 Elastomeric springs for the X-gantry
2 Gantries 1 and 3: elastomeric spring for the Y-axis
Gantries 2 and 4: reflecting bracket instead of elastomeric spring
3 Gantries 1 and 3: elastomeric spring for the Y-axis
Gantries 2 and 4: item 3 canceled 4
4 Gantries HS-60 Service Manual
4.7 Replacing the X-axis scale (00329316-01) 03/2003 US Issue
104
Æ Loosen the M8x20 hexagon socket-head screw in the hole in the elastomeric spring.
Æ Push the metal sleeve out of the elastomeric spring.
4.6.4 Installing the elastomeric spring
Æ Insert the metal sleeve into the new elastomeric spring.
Æ Use the M8 x 20 hexagon socket-head screw to fix the elastomeric spring.
4.6.5 Settings
None 4
4.7 Replacing the X-axis scale (00329316-01)
4.7.1 Tools and equipment
– Set of DIN 911 Allen keys
– Spacer gauge
– SITEST program
4.7.2 Parts
X-axis scale for the HS-60, from item number 00329316-01 4